How to Make a Simple 'Hand Stand' for Your Phone
With a few readily available materials, we are going to show you how to give your phone a 'hand!' Ha, couldn't resist the pun! We are making a 'hand' stand for your phone. With this stand, your phone is always, 'handy!' (Promise, that's the last one!)
Take a look at the video or read on for the tutorial. But, really, check out the video for a quick overview of the project.
For this project you're going to need the Quikrete mix of your choice. We are using a 10 pound bag of mortar mix. You'll need a mixing bowl, something to stir with, water, and a plastic glove as well as the appropriate safety gear like goggles, mask, and eye protection. It's important to protect your hands and face from the concrete dust.
Pour a small amount of concrete into the bowl. We probably used about three cups. Add water and mix until you have a brownie batter like consistency.
This next step is best done by two people--one to hold open the glove and the other to fill. Add the concrete to the glove a little at a time and move it down into the fingers until full. Continue to fill until about two inches from the opening of the glove.
Use what you have to prop the concrete glove into position. We are using a couple of stain cans.
We secured the wrist of the glove with two cans to keep it upright and in position. We are using a small square container to make an indentation for the phone to sit.
Lastly, we used a concrete doorstop to keep the square container in place. Be sure not to set the doorstop on any of the concrete fingers. The concrete is allowed to set for 24 hours.
After 24 hours, remove the glove from the concrete hand. The concrete will still be damp at this point so allow it another couple of days to dry out before using.
All finished. The hand on the left is made with Quikrete countertop mix and the voids are painted with DecoArt metallic gold paint. The one on the right is made with the Quikrete mortar mix.
Here you can see how we added gold highlights to the voids.
Need a hand? We have two to choose from!
Watch the video for the full how-to!
Enjoyed the project?
Resources for this project:
See all materialsComments
Join the conversation
-
Stephany on Dec 15, 2018
You just gave me an awesome answer to what to get for Christmas for all the teens and pre-teens in my family who have everything. Because there are so many kids in the family we decided years ago to put a $20 - $25 cap on gifts from Aunts & Uncles. Every year it gets harder and harder to find something. Now this I think they'll find cool and unique. I'm thinking a personalized one with a phone charger attached. You can never have too many chargers. ;-) Thank you for the neat idea.
-
-
Veronica Jones on Jan 11, 2019
That's a great idea, I'm also thinking I could do that for candles also. Thanks
-
Frequently asked questions
Have a question about this project?
Did you find a difference between the two mixes?
Cute idea...but wouldn't the concrete surface scratch the phone? I wouldn't risk it....
Great idea! I’m wondering if putting the hand in a bowl would give it a more realistic bend to the “fingers” and still work?