Glider Webbing Repair!
Hey folks, so on an expedition to buy a project piece, we found this cute glider for sale. Since the price was right, and it seemed in perfect condition, we bought it to use at home.
After about a week or so....OOPS! The rubber webbing had rotted and after being used awhile, it all broke. 😑
I love Amazon! I went online, ordered some webbing and some clips (after looking at the broken ones).
I measured the chair to check the spacing, and measured the broken straps as well.
I then cut the strapping to the right lengths.
I put the clip into the table vice.
Making sure to pay attention to the direction.
I carefully inserted the webbing as close to being centered as I could.
Then I tightened the vice as tight as it would go. I followed the procedure for the other end and the remaining straps. Making sure my clips faced the same direction.
I then laced them and popped the clips into the slots on the chair! Woohoo! This was a first for me, and I am sitting in the chair as I type this post. ☺️☺️
May decide to update the cushions next! 🤷♀️☺️
Enjoyed the project?
Resources for this project:
See all materialsComments
Join the conversation
-
-
-
William on Sep 26, 2019
Great instructions and a great job. Super fix. This will help a lot of Hometalkers.
-
Lynnette Soltwedel on Sep 26, 2019
Thank you ☺️ I was pretty impressed with how easy it was to complete.
-
-
Frequently asked questions
Have a question about this project?