How can I lighten fireplace bricks (pic)?
I'm not sure what they are. Tile possibly? I'm a new to DIY and I don't want to mess it up and ruin the area,especially the flooring. I also want to lighten the fireplace it self. The bricks on the fireplace are in fantastic condition and we use the fireplace every winter. Any suggestions, tips or advice would be greatly welcomed. Thank you.
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
Can I use Faux Stone over painted brick fireplace?
Would it be best to fill grout grooves with mortar like a week before just to assure even surface and again they have been painted also. Frankly do not know if it fo... See more
How can I put thin brick/veneer around my fireplace?
I am sending a photo. I wish to thin brick or veneer around my fire place. The whole coral wall. Or any ideas? Does veneer look real? Any websites I may look at? Than... See more
First the hearth or floor: yes, they appear to be ceramic mosaics. They can be tiled-over with the proper prep work.
I would make sure the new tile is not glazed, but rather a through-bodied porcelain tile. This makes the exposed edges look finished.
I would find a āgaugedā tile, then there will be no need for grout joints- yay.
Grout is the source of 98% of tile problems. I would also make the hearth deeper, as long as Iām doing all this work.
I would investigate mastic vs. thinset, if your new tiles are fairly large. If not, thinset with a poly acrylic additive is what you need.
The blonde brick is in amazingly good condition around the firebox where black spot marks usually are abundant. I would try to clean it with a lot of clear soapy water and then put a masonry stain on it, in an opaque white. This is also called a concrete dye/stain and is at the DIY stores as well as full line paint stores, although it is not paint.
It permeates the bricks & mortar and will not peel and is scrubbable.
What shades of white or the level of opaqueness will vary on the brand/manufacturer and I suggest shopping around.
Paint will sit on the surface of bricks and peel and scorch around the firebox. Thatās a useless solution for people who really use their fireplace.
You could try something like this: https://www.hometalk.com/diy/living-room/fireplaces-mantels/diy-brick-mortar-wash-27698381
DIY Brick Mortar Wash
Try white washing or painting the bricks. I wouldnāt worry about the hearth tiles except to protect them from drips.
White wash or German schmear would achieve the desired effect.
White wash or paint. Hearth, floor, are tile. You can also paint them or remove them. Can't tile over them because the fireplace insert sits right on them. You can remove and replace them.
https://www.hometalk.com/search/posts?filter=paint%20fireplace
I agree with Suellen.
I was going to suggest the white wash, it would look great and update it in a beautiful way!
I appreciate all suggestions and will definitely be researching.
Thank you all.
Painting the fireplace is always a great option. White bricks with the black fireplace is a classic look.