Shoe Rack Bench
![TheDIYPlan](https://cdn-fastly.hometalk.com/media/profile/2019/07/08/42986166_2.jpg?size=91x91)
This DIY shoe rack bench is very simple to make and cost about $30 of material. It’s very sturdy and could also be used as a bench for seating.
Using Miter Saw cut 2x6 44" long (x3) and drill pocket holes on two of the boards.
Clamp the boards together and screw them using 2 1/2" pocket hole screws.
Cut 2x6 9" long (x3) and 18 1/2" long (x3). Drill pocket holes as shown on the cut list. Clamp the boards before screwing them in. This will prevent the boards from shifting while screwing.
Take two scrap pieces and cut them to 7 1/2" long. This will be used temporarily to hold the middle section.
Now take the middle section and place it over the temporary scrap pieces and attach to the side boards. After that, attached the middle support blocks.
Finally place the bottom section and attached it to the side. Use 2 1/2" wood screws to secure to the middle section and support block. After everything is secured, remove the temp blocks.
That's it, you're all done with this beautiful shoe rack bench. Enjoy the organization!
Enjoyed the project?
Resources for this project:
![TheDIYPlan](https://cdn-fastly.hometalk.com/media/profile/2019/07/08/42986166_2.jpg?size=91x91)
Comments
Join the conversation
-
Dl.5660408 on Nov 05, 2019
I really like the unusual design, it gives it a nice sculptural quality 😁
-
TheDIYPlan on Nov 05, 2019
thank you!
-
-
-
Jennifer Howard| Cottage On Bunker Hill on Nov 05, 2019
Very cool project!! I love the modern look❤️
-
TheDIYPlan on Nov 05, 2019
thank you!
-
-
Frequently asked questions
Have a question about this project?
A brilliant design but can you sit on the bench? Will it support the weight