Sculpting Cement For A Frugal Spa Update
While we love the wonderful-to-have hot spa sitting right on the patio in our backyard, it wasn't much to look at. Wanting to give it a little more character, but not add the cost of an expensive pergola that would block our view of the night sky, instead we made fake cement boulders.
The man with the tools decided to use some cement and sculpt his way around the spa making his version of rocks.
He used the inside foam from our old hot tub cover to shape the fake boulders, as well as to shape the form for the steps, then covered it with chicken wire mesh.
The cement was basically sculpted as if it was clay, till a fake boulder took shape.
Working around the elements, rain, cold etc., there was no timetable which was good because it wasn't a fast process.
The steps and all the cement needed to cure, after which time he went back in to stain and seal all of it.
On one side he created a bench to sit on with a fake brick look, and each of the boulders have a spot to put plants. The wood ledge you see comes off to access the spa guts.
We like this version better than the old spa just sitting on the patio.
If you have the ability to mix up some cement you might be surprised what you can do if you give it a try. We already had the chicken wire, foam, sand and cement stains, so the only thing we had to purchase was the cement.
There are lots of photos of the process on the Bliss Ranch blog, stop in and take a peek.
Enjoyed the project?
Suggested materials:
- Cement about 10 bags, sand, water, chicken wire (Home Improvement Store)
- Cement Stains (Concrete Shop)
Comments
Join the conversation
-
Ella on Nov 18, 2019
This is incredible, each " rock " on Wayfair cost $100 plus, I would love to do this ! Thanks for the share.
-
Frequently asked questions
Have a question about this project?