How can I paint the mirror stand?
I have a mirror stand that the paint is peeling off of it. I was trying to sand it down by hand with the 220 sandpaper I was wondering if I would be able to send it down enough to get the paint flakes off of it so I could paint it? Without it looking like they're still cracks in the paint. I'm doing it in the basement so I can't put a stripper on it that wouldn't be toxic to have in the house.
I'm not sure if you can see the paint flaking off of this?
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
What can I do about chipping paint on Ikea furniture?
Hi All, I recently had some Billy bookcases fashioned into a kitchen cupboard, and the carpenter who put them together lightly sanded and dusted, used Zinsser oil pr... See more
Can l paint a frame on the edge of a mirror and have it last?
The silver is coming off the back of my bath mirror around the edges there is no way to get to the back of this mirror to re-silver it. l was thinking of painting a ... See more
You should be able to sand off the flaking paint. If you want to use a stripper inside, you can use Citristrip.
I might try that because sanding it does not seem to be working for me. Is it a mess to work with?
No problem with sanding it down, it’ll work just fine. Make sure to sand the entire area around it to so it doesn’t look like there’s a dip in the wood. If the surface is flat using a random orbit sander will make the job faster, and easier to do. If you already have one, or can borrow one you’ll be all set. Buying one is an option but they are somewhat pricey, starting out in the $40 range and they get much higher.
You can use Citristrip indoors. But if you are vigilant enough, you should be able to sand it smoothly enough. Make sure to use a good bonding primer before painting.
I didn't know I was going to need a primer. Thank you for that information. Have a good day.
Here's a video that might help - https://www.youtube.com/watch?v=SAEGMYmZT7g
Sand off the flaking paint, then prime, then a couple of coats of a good latex. Win!
Try 80-100 grit sandpaper. The larger the number the finer the sandpaper. It will take a much longer time to remove flaking paint with 220. There are non toxic stripper like Safest Stripper and Citristrip but they are ALL a gooey mess. I always use sandpaper.
Yes, you should be able to sand it enough to get a nice finish to be ready to paint.
Thank you for your input. I'm sure it's going to be a work in progress . LOL I worked on sanding it yesterday and it didn't seem to do much good cuz there's a lot of detail on the post of the stand.
Definitely go with a rougher sandpaper to start. This will save lots of effort. Then use the 220 grit to "polish" the piece. Use a really good primer that will adhere to slick surfaces since you probably won't get all the slick surface off the grooved parts sanded.
Hi Karen, you can use a flapwheel on a drill, then paint it with chalk paint, it covers really well!
I just might try that, thank you so much.
You need to use a coarse sandpaper. 80 grit should work. Fold the sand[paper to get into the detail. You don't need to sand down to raw wood. Just sand the remove any loose paint. Prime with Kilz primer then paint your color
I would use a lower grit 80 sandpaper to take off the flakes, then go over it with 220 to smooth out the wood. Try using an emory board to sand the grooves. Or if the grooves are not flaking do not worry about them. You will need to prime the wood with a stain blocking primer. Lightly sand between 2 coats. Then you can paint with the color of your choice. Paint with a good acrylic latex paint. Sherwin Williams sells a really good one. I would use a mohair 4 or 6 inch roller on the mirror.
I totally agree with Dee - she's got the perfect recipe!
There are non toxic strippers that you could use indoors, just talk to someone at your local hardware store.
After seeing the pics, I'd advise sandpaper as the best product to use. Start with a coarse gran, especially on the base where there appears to be the most wear, then finish off with a 220 grit before priming and painting. CitriStrip works well but it will not smooth the wood which is needed or this piece.
there is a safe paint stripper https://www.thisoldhouse.com/painting/21193425/safe-paint-strippers
I would sand it and then paint it with chalk paint. I really like the Decoart chalky finish paints. You can see a project I completed with it here. Make sure you wear a mask when you sand, so you don't breathe in sawdust.
I would sand it with a rougher sand paper, then do a finer one. Here are some tips on how to paint it: https://www.youtube.com/watch?v=yNSd0xYfVJ0
of course that you can .. I would use chalk paint it is super easy to apply