Remove ?
I had my tub reglazed is there a way of removing it?
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How do I straighten out a curled plastic office mat?
I have a plastic chair mat under my computer desk that the edges are curled and won't lay flat. Have been unable to bend them back as the plastic is hard
How can I repair my nutcracker that's missing half a mustache?
Half the mustache fell off my 3’ nutcracker. How can I repair it? Nutcracker is made of some type of fibrous material, not plastic, not wood.
Here is a video for you:
https://www.youtube.com/watch?v=WjOJ6iOEkAU
Here's a post that might help - https://bathrenovationhq.com/blog/stripping-refinished-bathtub/
Hi Bj, you should be able to use paint stripper to remove the glazing. You may have to put it on quite thick and leave it for several house before it will begin bubbling but it should take it off.
You have to peel it off that’s the only way I know my mom did it and she hated it tha.ts how she took it off
You'll have to strip it and refinish it. THey make a paint stripper for this purpose.
Are you wanting to remove the new glaze you added?
Depending on the tub composition and how good the glazing job was, you might have to sandblast it to remove it. You could try using a drill with an scrub brush attachment and baking soda or barkeeper's friend.
Hello. This video could be helpful.
https://youtu.be/rYwKUQiYY14
Hi! I would take the same steps the kit called for when you prepped the surface. I remember when I did my sink, it involved sanding.
What is the reason why you now want the re-glazing finish removed?
How did it not turn out to meet with your expectations?
Here's a post that might help = https://bathrenovationhq.com/blog/stripping-refinished-bathtub/
Hello,
I would think you would have to have it Sand Blasted maybe?
Its very time consuming, but try this https://bathrenovationhq.com/blog/stripping-refinished-bathtub/
Hello Bj, hope this helps you out,
https://bathrenovationhq.com/blog/stripping-refinished-bathtub/#:~:text=Stripping%20refinished%20bathtub%3A%20Using%20the,off%20with%20a%20razor%20blade.
Try this: https://www.youtube.com/watch?v=oDynjVLgrRQ
I'm assuming you want to remove the glazing and not the tub. I would call someone and get it redone.
I’ve found what I need to know
You may be able to strip it