Diy lantern ?
Ok I watch a lot of diy dollar tree projects on you tube
They make everything look simple and easy and very cute
So I really wanted to make the lantern with picture frames
I could not get my hot glue to stick well enough
I tried adding E6000 glue with hot glue but still would fall apart
i finally got it to hold together after many attempts but it’s so wobbly
Have any of you tried this project and how did it turn out?
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
Does anyone know how to make a balloon garland or a balloon arch?
We have a gas light lantern in the front yard. Mantles needs to be replaced. DIY or should we call someone?
How to save a vintage sticker?
How can I preserve a 100 year old sticker on a glass pane. It is an old Pacific Telegraph and Telephone sticker on a door from a building that burned. The door and ... See more
Can you use E6000 to attach rhinestones to a plastic squeeze bottle?
I purchased small 2oz. plastic flip top squeeze bottles to use for hand sanitizer that I plan to bling with rhinestones and give as small Christmas gifts.I was wonder... See more
What adhesive should I use to attach wood trim to a mirror?
I am placing wood trim on the edge of a mirror. What adhesive or adhesive tape would be best to use
How do I make a wreath and hanger for a gravestone??
i want to place wreaths on my family members' gravestones at our Church cemetery, much like is done at Arlington National Cemetery on special occasions. I need ideas ... See more
I tried it too, and it would not stay stuck together. I finally used Gorilla glue and painted it to match the frames. Easier to go to Ikea and pick up a lantern for $3.
Hello. That does sound like an impossible situation.If I were to try— I would TRY using a wood glue or construction adhesive and possibly using a small amount of hot glue and taping the exterior circumstance.
I think this project from a favorite blogger that I follow —is a little different—- but perhaps it is could have valuable tips?
Good luck it does seem tricky endeavor.
https://www.thenavagepatch.com/diy-dollar-tree-lantern/
I would try clamping it after gluing. It should give it a little more support while the glue dries.
You might need to use a high heat glue gun to get it to stick. e6000 will also work but you will probably need to clamp it until it dries.
One of the tips I learned after a couple of disasters, was that you need to apply the E6000 to both surfaces, let rest for a few minutes, and then join the two peices together. For some reason that works great.....take your time in joining the two glued pieces together.
Fix-All Adhesive is a great all-purpose solvent glue and sealer. It seals and repairs almost any surface easily and quickly. A great product for gluing wood, fabric, brick, canvas, and concrete. Also repairs tears and helps fill cracks and holes.
Hi Peggy. I watch a lot of You Tube projects too. My favorite is "Your House A Home" I love what she makes. Always uses items from the Dollar Tree. She uses E6000 but always puts a dab of hot glue (Gorilla Clear Grip Glue) at the corners to hold the pieces together while the E6000 dries. And oh, it looks so easy. I wish you well Peggy. Happy New Year.
I hear you on how frustrating that can be! I personally haven't tried this particular project but super glue might save you future headaches.
Super glue gel
E6000 or Fix all adhesive will work, here is a link on how to clamp it:
https://freshvintagebylisas.blogspot.com/2019/03/make-picture-frame-lantern.html
Hi Peggy, we put small L-shaped brackets in the corners of ours. Hot glue isn't terribly strong. The brackets look something like this - https://za.rs-online.com/web/p/enclosure-mounting-brackets/0427991/?cm_mmc=ZA-PLA-DS3A-_-google-_-PLA_ZA_EN_Enclosures_%26_Server_Racks_Whoop+(2)-_-(ZA:Whoop%21)+Enclosure+Mounting+Brackets-_-427991&matchtype=&pla-313118671596&gclid=CjwKCAiA_9r_BRBZEiwAHZ_v1_qYrIXrVKx8mMD0bFE0n1qVJhAnl3UF_IhQppRHHGWY8KaPdmmrMhoCDU8QAvD_BwE&gclsrc=aw.ds
Tape the pieces together with painter's tape to hold until it sets and you should be good. Also, make sure the type of glue you are using is applicable for the type of frames you are using.
Hi Peggy, hope this helps you out, and a few type of glue to use are listed
https://www.youtube.com/watch?v=c8owEOBgSto
Peggy,
Were the picture frames you were trying to glue together made from metal, plastic, or wood?
Hi Peggy, I use Gorilla Hot Glue because it is STRONG and you can buy it Walmart or any craft store.
Try gorilla glue and clamps
are these wood frames or resin? wood glue for wood and clamps. super 77 spray adhesive ...great for resin! wait till it starts getting tacky.