How do I fix a hall table with antique stain
![Jane](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-J-59A1F4.png?size=91x91)
![](https://cdn-fastly.hometalk.com/media/profile/2019/04/28/16104392_2.jpg?size=50x50)
![](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-J-59A1F4.png?size=50x50)
![](https://cdn-fastly.hometalk.com/media/profile/2017/03/06/21557790_1.jpg?size=50x50)
Related Discussions
How to get rid of mice?
![Jessica Hill](https://cdn-fastly.hometalk.com/media/profile/2021/08/22/107358_1.jpg?size=50x50)
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
![Abby](https://cdn-fastly.hometalk.com/media/profile/2021/02/07/50639059_1.jpg?size=50x50)
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
![Sharon](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-S-59A1F4.png?size=50x50)
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
![Frisco's Cards](https://cdn-fastly.hometalk.com/media/profile/2017/01/27/18563525_1.jpg?size=50x50)
How do I fix squeaky hardwood floors?
I have an antique oak dresser with a dark water stain- what can I do?
![Audrey](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-A-69E0FF.png?size=50x50)
My grandson set a glass of water on dresser over night. Have tried toothpaste, Vaseline, coconut oil, mayo, no success. And other suggestions.
How do I remove hot steam stains on wood table?
![Lorraine](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-L-50E3C2.png?size=50x50)
I have white cloudy marks on oak table from heat- how do I remove them?
It would be very hard to match this. What is underneath? It looks to be cardboard. If it is wood, scrape it off and redo the top. You can buy crackle medium where chalk paint is sold.
Hi Jane, the best way to redo the crackle is to remove and start over. Here's how to do crackle using Elmer's white glue. There are also several youtube videos out there to guide you if you prefer to see the steps rather than reading about them.
https://dailydoseofdiy.com/how-you-can-make-paint-crackle-with-glue/
Looks like a crackle finish over particle board. Janice is correct. You would need to start over. Seal the particle board with polyurethane before doing the crackle.
Hi! I would strip it and refinish it. A patch is going to show, probably. If you like the finish, you could try fixing that one area. Odds are, as I said, it probably won't match, but, you could try it first. Honestly, I thought it was "alligatoring" of old varnish when I first saw it! Good luck and stay safe!
You will need to remove it, it will just keep coming off. It looks like normal paint with a crackle effect so very simple to do.
Hello there,
This is a Cracklelure finish. Made by a Chemical reaction of one product on top of another. The only way to try and fix this would be to stripe it off and start again, that is unless you are an artist, whereby you might be able to replicate it artificially, using paints.
I think you need to scrape and repaint
If you decide to use the Elmer’s Glue crackle method, my experience is is that you have to work very very fast and don’t over work it.
If you use the Hyde Glue method, you’ve got a lot of time for the glue application, but the top coat paint application is also go-fast and no over working it.
How’s about masking off the middle & repainting the border in a solid color?
You could a) scrape it off, and then put a new crackle finish on it, or paint it solid; b) paint the damaged area base coat the same color as the original in the damaged area, and then do your crackle medium on top to try to match it. I would suggest practicing a a few boards until you get it looking the same. You buy crackle medium in the paint section of the store where specialty paints are.
Crackle's time had passed. Scrape it off and give your table an update with a different medium. You can fill in with wood lathe, tile, cement, decoupage paper or fabric then cover with glass, or lay pennies and cover them with a 2 part epoxy. Let your freak flag fly.
It needs to be stripped of the crackle, sealed with polyurethane, and then go to a new finish or re-paint.
At this point, stripping and refinishing would be your best best. Citristrip is a mild stripper, just make sure you remove before it starts to dry.
This will definitely need to be stripped, this should help: https://www.youtube.com/watch?v=bV74s1zo4a0
Thanks to all for the very helpful suggestions.
If you were real patient and good with a artists brush you could paint it. But if the original is a stick on layer then there is not much you can do . Perhaps look for another product that can give it the same look and redo the whole table.... Good luck..
Thanks for taking the time to answer - very helpful
Here are some ideas you can look at https://www.pinterest.com/search/pins/?q=How%20do%20I%20fix%20a%20hall%20table%20with%20antique%20stain&rs=typed&term_meta[]=How%20do%20I%20fix%20a%20hall%20table%20with%20antique%20stain%7Ctyped
cover all and do new one .. it is a crackle that you can do yourself super easy