Can I use brush to paint a metal screen porch??
![Jessica](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-J-FF8282.png?size=91x91)
![](https://cdn-fastly.hometalk.com/media/profile/2019/08/25/6953198_2.jpg?size=50x50)
![](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-J-59A1F4.png?size=50x50)
![](https://cdn-fastly.hometalk.com/media/profile/2019/04/29/86342_5.jpg?size=50x50)
I want to paint my screen porch. Do I need to do more than cleaning for the prep? Can I use brush?
Related Discussions
Should I paint or stain my oak kitchen cabinets?
![Lauren of Mom Home Guide](https://cdn-fastly.hometalk.com/media/profile/2019/03/24/161201_3.jpg?size=50x50)
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
![Ginny Wathen](https://cdn-fastly.hometalk.com/media/profile/2016/11/05/14292662_1.jpg?size=50x50)
How do I paint my front door? It's metal.
How to paint grout?
![Ann7680670](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-A-BC70FF.png?size=50x50)
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
![Chris jenne](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-C-FF8282.png?size=50x50)
What is the best method to whitewash bricks surrounding a fireplace?
Can I use a small power sander to remove paint from my porch?
![Deb-greg72](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-D-1ABB71.png?size=50x50)
Have painted it with outdoor Behr deck paint but it has flaked up. I got a lot of it up but need to get the rest off before repainting. Getting too old to get down ... See more
this gives info on prepping and painting
https://www.ehow.com/info_8510898_type-paint-aluminum-porch.html
Hi Jessica, here's an article that might be good to see before you start your project. A brush should work fine after all the prep, which is the most important part.
https://www.handyplan.net/blog/before-and-after-screened-in-porch-repair-repaint
Cleaning needs to be a thorough job but a brush will be fine. I would also scuff the frame with fine steel wool prior to cleaning so that it will adhere better.
Yep a brush will absolutely be fine. Before that though a thorough cleaning / spraying down to get it as clean as possible is step one. I would scrub anywhere that can be scrubbed as all screened in porches I know of tend to get pretty grungy and you want to be sure you're painting a clean surface for it to last.
Are you panting concrete? Just a good cleaning with soapy water and a hose, with a good rinsing should do. If you can't hose it off use a cotton mop and bucket, just rinse well. Get a masonry paint. Home Depot had limited colors. Sherwin Williams can dye any color.
A yes to both questions. A thorough cleaning is needed to remove any dirt and dust so the paint will stick well to the surfaces. I would remove any loose or peeled paint with either steel wool or a metal brush.
Yes, you can use a brush. You might consider a metal primer before painting for best adhesion.
How To Paint An Aluminum Screened Porch
https://upgradedhome.com/how-to-paint-an-aluminum-screened-porch/
Here is a post that might help https://askinglot.com/can-you-paint-aluminum-screen-enclosure#:~:text=You%20can%20easily%20paint%20both,down%20with%20a%20cleaning%20solution.
Rustoleum is your best bet to paint a screen porch.
Yes, you can, but spraying it will give you a smoother finish.
Using spay would be better, especially metal screen porch. But yes, you can still use brush.
Hello Jessica.
If you use something like Rust Oleum you can use a spray straight on top without prep.
Roller would be easier
I would powerwash it first. Then you could use any paint applicator recommended for the paint you are using . Be sure to use an exterior porch paint. Good luck!
Hi, You can but be prepared for a haze of fine splatter.
I would spray if possible, we've always had our best results on metal with spray. If not you risk brush marks. However it might be hard to do with the screens if you can't remove them.