Giving a 1942 Vanity Table a New Life
I found this vanity on a local barter and trade site for $50. I've been looking for a vanity for a long time and bought this one to make into something I'd love and use.
The veneer had damages, but the vanity was in tack. I knew I'd first remove the veneer.
Removing the veneer.
I tried using heat to release the veneer, but found the most productive way to get it off was picking and peeling using straight edge razor and various putty knives. Not the most fun part for sure. Some peeled in strips, some areas I had to pick tiny pieces at a time. I'm sure someone has a better method, but this worked for me.
Most veneer off.
Getting down to the bare bones.
After removing all veneer, I sanded. Getting down in all the cracks and crevasses took patience. I sanded it even more after this to get the wood as fresh looking as possible. My best advise here is sand, sand, and sand some more. When you think you sanded enough, go sand it more.
Stain!
I carefully stained the piece. I used a grain defining stain. Because of the variation of types of wood it gave a variation in color I was happy with. I did all the same steps with the topper that holds the mirror.
Found this stamped on the mirrors!
The stamp says "Galax Va.", can't read the middle, and 1942. Which I'm assuming dates the piece to 1942.
I used 4 coats of premium satin finish polyurethane. And used a little Brasso to clean the handles.
Finished!
I'm so delighted with the outcome! Over 100 hours of blood, sweat, and tears.
Before and after side by side.
Comments
Join the conversation
2 of 1316 comments
-
Wonderful job you did on this piece!!! I have a similar one that is missing the mirror, although it may be packed away in my mother's shed with other furniture that belonged to my great grandmother. I have the chest of drawers that goes with the set but am not sure who in the family has the bed now. The vanity has a missing strip and a raised piece of veneer and one drawer missing. After seeing this, I realized I don't have to try and repair and replace the veneer but can remove it and sand down the wood itself. As soon as I finish redoing a bed I'm working on, I will have to attempt the vanity and chest of drawers. Yours turned out absolutely beautiful!
-
This is a beautiful job!!
Frequently asked questions
Have a question about this project?
I’ve got 2 old desk—1 with a mirror, 2 dressers—1 with a swivel mirror...all have claw feet except 1 desk. I want to refinish all of them and I know some were grandparents things and others were not but were from 30’s-40’s... I’m weary of doing anything because I’m afraid I will deface the value of them. How do you know (never been appraised) if something is an antique or if you shouldn’t do anything to them...I’m more afraid I’d ruin them...
any help would be appreciated!
I have started this with a piece in like condition, veneer on bottom, peeling. Please tell me how to replace the beautiful beveled mirror I broke on it?
You did a beautiful job restoring this piece.
I have my grandmother’s dresser & it’s basically the twin to this one. Thanks for the tips on refinishing it. You give me hope.
The mirror on mine is intact, but discolored. There are dark aged places in/behind the mirror. Any hints on restoring the mirror? There’s a beautiful pattern etched into the edge of the glass so I’d really prefer not replacing it if at all possible.
Thank you.