Upcycled Drawer Planter
I challenged myself to make 5 projects in a week, all things for my porch. This easy, upcycled A frame drawer planter is my favorite. I love that it gives my flowers some height and is not your typical planter!
I knew I want some height with my planters so I made this easy A frame upcycled drawer planter. be sure to check out the more complete tutorial to see what NOT to do: http://bec4-beyondthepicketfence.blogspot.com/2014/05/5-projects-in-week-project-4-upcycled.html
I painted two drawers, one smaller than the other. They should be the same width! I also cut 4 reclaimed boards at a 15 degree angle on ONE end.
I am sure there is a more professional way to do this, but this is what I did and it worked great. I lined the angled boards up along a straight board and made sure they lined up at the top as well.
I measured 8 inches up and drew a line on each leg.
Attach the larger, bottom drawer with screws from the inside of the drawer. Measure from this drawer up and attach the smaller drawer the same way.
I cut two trapezoids, also at a 15 degree angle and added these to the top of the A frame.
Next came a simple handle which really is nice for moving this around.
I drilled drain holes in the bottom of the drawers and gave the whole thing a good coat of Minwax's Helsman urethane.
I love the colors that tie in with the other projects I have been doing!
Want more details about this and other DIY projects? Check out my blog post!
Published May 23rd, 2014 9:47 AM
2 of 20 comments