How to Clean Jacuzzi Tub Jets
by
Anna M
If you have grime around your jacuzzi tub jets, you can try soaking your tub in a vinegar/ water mixture or a bleach/water mixture for five to ten minutes. Then run your jets to circulate the water. My full post below will give you all the recommendations and measurements!
Want more details about this and other DIY projects? Check out my blog post!
Comments
Join the conversation
2 comments
-
Anna M, great advice on cleaning tub, but everyone needs to remember to flush the tub with fresh water after each bath to remove as much of the bath oils soap etc before it has a chance to dry and stick to the jet pipes. Jet tubs are bio disasters in the waiting. Even with cleaning with strong bleach the bio film remains. Where this becomes an issue is when the tub is running. The bacteria is aerated, carried out by the bubbles where you breath this in. If you do not get the soap, oils, etc out right after you use the tub, this bacteria will not be washed out with a simple fill, run and flush cleaning. But doing what you suggest will help prevent this issue.
-
This is a great addition to the information. Thank you!
Frequently asked questions
Have a question about this project?