

Related Discussions
Blackout curtains behind vertical blinds

I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?

Does anyone know how to make a balloon garland or a balloon arch?
Where do I find the small electric glue skillet that you use when mak?

Do all sewing machines have a presser foot tension regulator?

I am a mid to intermediate level seamstress. I've had two machines over the past 40 years, a Kenmore, followed by a White sewing machine, both very nice sewing machi... See more
What are these?

I have a few of these and have no idea what they are for. Can anyone help?
Where to find a bedspread that covers the pillows?

I have hunted all over the internet for a bedspread that covers the pillows.Someone please guide me in the right direction to find one.
How do I open this tube?

The end of this tube is very hard. I slightly tried to punch the end of a knife into it and also tried a large paper clip but neither budged it. I was a bit timid in ... See more
Karen: use a hot glue gun
Please use a hot glue gun for heating glue.
The gun uses a continuous-duty heating element to melt the plastic glue, which the user pushes through the gun either with a mechanical trigger mechanism on the gun, or with direct finger pressure. The glue squeezed out of the heated nozzle is initially hot enough to burn and even blister skin.
Hi Karen. If you are trying to remove glue, use a heat gun. You can get it at any home improvement store. Be sure to not hold it in one spot very long. Wave it back and forth.
i am so sorry for the confusion - I was watching HOMETALK TV wreath tutorial and he uses a skillet looking item with melted glue and I like it better than a glue gun
I think this question relates to a specific post.
Hi Karen, I would be careful what I put the glue in, it could damage your electric skillet. Be safe and stay well. Microwave the glue on full power in 20-second intervals.
Depending on your microwave and amount of glue, you should at least be able to partially melt the sticks. If there are still solids, microwave the glue for an additional 20 seconds after stirring it with a craft stick or plastic spoon.
How to Melt Glue Sticks: 8 Steps (with Pictures) - wikiHowwww.wikihow.com › Hobbies and Crafts › Crafts
Yes, there are little ones made for that, but any old electric skillet will work. Here is an inexpensive one: https://amzn.to/2xlkmhH
Hello. They make little pots for melting hot glue for dipping purposes I have one that’s probably 20 years old. Here’s a link that might be helpful to see if there’s some options you would like to consider.
https://www.amazon.com/s?k=Hot+glue+pots&i=arts-crafts&ref=nb_sb_noss_2
here is an idea for one of these items
https://thebestthings.com/newtools/hide_glue.htm
Thank you all so much - you are too sweet. Bless you
Hi there, I just saw one on this DIY list. https://www.marketplace.hometalk.com/nicksseasonaldecor-shop4?utm_campaign=week21_nick&utm_medium=storepage_ht
You could use a double boiler to water in the bottom pot and pot on top with glue
Hi Karen: You can line a small pot with foil and warm your glue in that, or if you have a chocolate melting pot, line that with foil, or, if you have an electric flying pan or griddle, you can line that to pour your glue into. I bought a small electric glue pot from JoAnn's years ago, don't know if they still sell them though. Good luck and be careful.
Hello Karen,
For animal glue, my father would use old cooking pot with boiling water, over which he would use an old paint kettle suspended into the water with a stick going through the handle of the paint kettle........Best wishes.
Hi Karen, you can use any type of pot, a no stick would be the best, but here is another example of what you can use, hope it helps
https://www.youtube.com/watch?v=lJbPIaqjZ3s