Anthropology Inspired Lampshade
I’ve been drooling over this lampshade but even on sale, it’s way out of my price range. What’s a girl to do? Well, if she’s a true DIYer, she’ll make her own!
This lampshade is embroidered, which I know how to do but the lampshade that I wanted to use really thick and pushing the needle through was very difficult.
Here is my lampshade which I picked up at a thrift store for $2.00.
My lampshade has a heavy cover and is lined so to make my colorful lampshade:
A-I took plain white paper and creased it on the ribs of the lamp
B-and cut the shape with scissors
C-I made four of these shapes
I tore a few pictures out of a coloring book with flowers that I liked.
A-Because my lampshade is thick, I held the coloring book page up to a window and placed the white paper on top.
B-and traced the flowers onto the white paper.
If the lampshade that you are working with is thin, you could trace your pictures directly onto the lampshade. Place the picture on the inside of the lampshade, turn on the light and trace.
A-After I traced my entire pattern onto the white paper
B-I used painter’s tape and taped the pattern onto the lampshade
To transfer the pattern onto the lampshade, I used a pencil and punched holes through the paper.
A-You can see the dots that were made when punching through the paper
B-I then connected the dots with the same pencil.
This is the lampshade after the pattern was transferred and the dots were connected.
I wanted to embroider using paint so I bought fabric paint in tubes with a thin tip.
A-I began by outlining each design in the appropriate color.
B-For the center of a blackeyed Susan, I filled it in with dots of black paint and then added brown dots for a layer of color.
I continued to add lines of paint, as if I was embroidering; however, that didn’t work. The paint was too thick and it looked really messy.
I outlined each design using the tube of paint, then while the paint was still wet, I used the tip of a small paint brush to drag paint into the design and fill each pedal for flowers. I continued to fill the design until it was complete.
Once the paint was dry, I went over the each flower, adding details and more color.
I allowed the shade to dry and couldn’t wait to see it “lit up” which is the top picture. The bottom picture was taken during the day.
It does have raised color due to the lines of the fabric paint so even though it’s not embroidered, it’s beautiful and one of a kind.
Resources for this project:See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Published April 23rd, 2018 7:23 PM
2 of 118 comments