Are You Kitten Me Right Meow?

7 Materials
$10
1 Hour
Easy
Save your coffee table and spruce up your decor with these fun DIY coasters with vinyl and tile.

Prep coasters by washing and thoroughly drying to get any dust residue off.
*Optional*
Use Mod Podge sealer and spray a thin coat on the tile to seal it and create a tacky surface (it’s only tacky until it dries).


Create your desired design in Cricut Design Space software. Be sure the dimensions are smaller than your tile size.
Cut out and weed your design so it is ready for placement on the tile.
Use Cricut transfer tape to peel the design off the backing.
Place the image on the tile to transfer the image. You will need to burnish slightly to make sure it adheres.
Pull up the transfer tape and you are done.
I do seal again with the acrylic spray, but this step is optional.


Be sure to add some felt pads or a foam backing to prevent the tile from scratching your surfaces.
To get complete step by step instructions on how to design, cut, and assemble this project, visit Rock Your Craft for a full tutorial.
Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Jesica Helgren
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  1 question
  • Jean Quintana Jean Quintana on Aug 21, 2018

    What about sealing this tile decoupage with the outdoor Mod Podge and just using printer paper?

Comments
Join the conversation
2 of 21 comments
Next