15 Fabulous Ways To Pretty Up Your Flooring For Less
Line Up Plywood For Planking
Pull up the carpet and nail down each plank. Get tutorial here
Put Down Laminate Flooring
Choose a gray toned flooring to begin laying down, then peel and stick down in place. Get tutorial here
Stencil Concrete For Faux Wood
Choose a wood grain patterned stencil, apply paint onto the roller, and begin at the edge of the floor. Get tutorial here
Paint Marbling On Your Floors
Paint the floor white as a base coat, put painter’s tape down in a grid, and squiggle black paint for the crackle. Get tutorial here
Roll Out Contact Paper For Fake Wood
Clean down your floors first, then roll out the contact paper. Get tutorial here
Layout Cork For Padding
Put down an underlayment beforehand, and place down the cork flooring one at a time. Get tutorial here
Spread And Measure Out Shiplap
Begin laying the floor lined with tongue and groove adhesive, then nail down with Ryobi. Get tutorial here
Save Over $5,000 By Putting In Hardwood
Place vapor wave between the subfloor and the plywood barrier, and then proceed to put down the hardwood. Get tutorial here
Brush A Paisley Print On Your Basement Floor
Paint the base of the floor black, and fill in a paisley stencil with white paint. Get tutorial here
Stencil A Bright Colorful Pattern
Prep the floor with a primer, and roll over a floral stencil with chalk paint. Get tutorial here
Decorate The Bathroom Floor In Gray
Remove the previous linoleum flooring and after laying the tiles grout them. Get tutorial here
Mix And Match Carpet Tiles
Draw out your grid to scale with measurements and cut down the various carpet patterns with a box cutter. Get tutorial here
Paint Over Your Floor
Rip up the debris left over from the carpet, paint a light gray on the top of the floor, and coat with polyurethane. Get tutorial here
Brush Paint On Vinyl Flooring
Paint with a tinted primer the color of the walls, and paint 2 to 3 layers on the floor with color of choice. Get tutorial here
Coat Paper Bags All Over
Tear the bags into chunks and soak in glue, then spread on the floor sealed by resin. Get tutorial here
