How do I ?

here is info for your rain chain

https://www.pinterest.com/pin/325455510553605196/

https://ourcraftymom.com/diy-clay-pot-rain-chain/

If the pots are plastic you can just drill holes with a regular drill bit. If they are clay pots you will need a masonry drill bit. Start slow with the masonry bit so not to crack the pot.

are there any hooks I can buy to put through the holes in the bottom of the pots? The ombre one from pinterest was the one I was trying to make

Do you have a all metal dog chain or a lamp chain you could use or wire would work to

https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.pinterest.com/pin/162481499041486940/&ved=2ahUKEwjt8Y-f1PbzAhXVfXAKHfKeALsQjjh6BAgYEAE&usg=AOvVaw3wd1yKXXMZXvLw08CwhT9W here are some really great ideas from pinterest.

You could use a large nail strung through the chain. The nail would lay across the bottom of each pot.

Thanks all for your help... knew I could count on you!

I personally always find roaming around the hardware store is a great way to find things you wouldn't ordinarily think of as solutions. Your best bet is the rope and chain section, like a quick link.

If you are looking for info using small galvanized pots here it is:

https://www.curbly.com/10371-make-it-a-rain-chain

There are "S" shaped hooks that you could put through the hole in the bottom, available at stores like Harbor Freight, Home Depot, Lowes.

Hello, hope this helps you out,

https://www.isavea2z.com/how-to-make-a-rain-chain/

I would buy a wooden dowel the same diameter as the hole in the pots from the hardware store, cut down to 3/4" to 1", then I would pre-drill a hole in the dowel piece slightly narrower than a hook for the chain