How to clean and dress this table?
Hi! I recently inherited a Duncan Phyfe that is exactly like the one in this thread:
https://www.hometalk.com/diy/paint/furniture/q-how-to-restain-a-duncan-phyfe-table-44313984
I don't have the strength or abilities to strip it all down, neither can I afford to have a pro do it.
I'd like to just deep clean it and then re-seal. The wood is in great condition, and the finish seems nice, albeit imperfect.
Murphy's Oil Soap to clean, and then what to reseal?
Thanks!
-John
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
If the finish is in good condition, you shouldn't have to reseal it at all after cleaning with Murphy's Oil Soap. Very often these tables were polished once a week with spray furniture polish by the owner.
Murphy's Oil Soap is a good choice, follow label directions.You could also use a product called Orange Glo, it is a lighter cleaner than Murphy's and no need to reseal.
I love using Restor-a-finish to do just what your asking about. So easy and the results are amazing.
here is info on a product that gets great reviews : https://www.google.com/aclk?sa=l&ai=DChcSEwj3iZuEhY70AhUwam8EHVeVDkkYABANGgJqZg&sig=AOD64_0vdQLl8Q3qWfhl8fMMx42bJ3J23Q&ctype=46&q=&ved=2ahUKEwiF5ouEhY70AhVrk2oFHaUkA-kQ9aACegQIARBY&adurl=
You can't really put new sealer over the old and you shouldn't. New sealer can soften and "melt" the existing sealer. Make a big mess. After you clean it you can use a spray wax which would need to be done often or a paste wax which can last up to a year.
I am not a fan of Murphy's Oil Soap as it leaves a residue. In order for the new finish to adhere, I would clean it with TSP or denatured alcohol and then use Minwax stain and poly in one.
This is great news guys! Thanks!
Hello. A good beeswax polish might be suggested.
We like this one which might be found at local retail shelves.
First found it at Floor and decor.
Here’s a link for reviews and Q&A’s and a little about the product.
https://www.amazon.com/Howard-Feed-n-wax-Polish-Conditioner-Beeswax/dp/B00I9DODJE/ref=sr_1_8?crid=1TF194DLOKZ4E&keywords=beeswax+polish&qid=1636562316&sprefix=beeswax+poli%2Caps%2C170&sr=8-8
You can sand small areas each day if you really want to strip it. It isn't that hard. I personally hate the liquid strippers and much prefer good old fashioned sand paper. Any cleaner including dish detergent that de-greases fingerprints will work. You can wipe stains on with a rag. Since we have no idea what shape yours is in it is hard to give you a definitive answer for refinishing.
Let me say thanks, again!
I used Murphy's and it made the table look almost new! A bit of Restorall and it should be darn-near perfect.
Thanks!
-John
Glad you found a solution! For future reference there's a product from Dixie Belle paints that is like TSP called White Lightning. Does a great job cleaning up.
This person here used polyurethane - 3 coats of it to seal the wood: https://thehouseofhoodblog.com/easy-butcher-block-counter-diy-laundry-room-reveal/