Brett Lipton
Brett Lipton
  • Hometalker
  • New York, NY

I Made an End Grain Wood Floor From Scratch and Saved Myself $4000!

6 Materials
$468
20 Hours
Advanced

One day I had come across a flooring in an old church and became intrigued, I had never seen anything like it before. It was a wood floor, but as opposed to the side of the grain being exposed, it was the end of the grain. I decided that I needed to recreate this old world craftsmen appearance in my own home. Full details of the entire project are here: http://goo.gl/pV51hA
i made an end grain wood floor from scratch and saved myself 4000, dining room ideas, diy, flooring, hardwood floors, woodworking projects
i made an end grain wood floor from scratch and saved myself 4000, dining room ideas, diy, flooring, hardwood floors, woodworking projects
A few months ago I purchased a house that was carpeted from wall to wall with the most horrible carpeting. Before purchasing it I had done some snooping and after lifting several corners, realized that underneath the carpeting was hardwood flooring, throughout. So, I knew after purchasing the home it wouldn't be much of a task to rip up this eye sores, spend a few hours sanding and refinishing and I would be happy with the new look. below is what the dining room looked like on closing day.
i made an end grain wood floor from scratch and saved myself 4000, dining room ideas, diy, flooring, hardwood floors, woodworking projects
After ripping up the carpeting, this is what I found in the dining room... MDF. Not what I wanted to see. I had hopes that their might be some hardwood under it so my adventure continued.
i made an end grain wood floor from scratch and saved myself 4000, dining room ideas, diy, flooring, hardwood floors, woodworking projects
After ripping up the first MDF subfloor (and having started some painting), I stumbled across this, more of less of what I wanted to see, linoleum flooring.
i made an end grain wood floor from scratch and saved myself 4000
I went out and found twelve, 8 foot long 4 x 6 timbers of reclaimed yellow heart pine that I proceeded to cut into 1,800 4 x 6 tiles. I set up my Dewalt DW705 chop saw with a 1/2" stop to make the cuts quickly and consistently. This process took about 5 hours. When I was done I was left with a completely filled 32 gallon trash can of sawdust that I saved for later. I had plans for that too.
i made an end grain wood floor from scratch and saved myself 4000
Here are some of the piles and piles of tiles and more tiles
i made an end grain wood floor from scratch and saved myself 4000
Along the way I decided to border the room to accent the edges.
After the tiles were set, I sealed them with a coat of polyurethane, lightly thinned with about 30% mineral spirits.
i made an end grain wood floor from scratch and saved myself 4000
After the tiles were set, I sealed them with a coat of polyurethane, lightly thinned with about 30% mineral spirits.
After the tiles and border were set and sealed. I made a mixture of sawdust from my cuttings with polyurethane with a ratio of about 2 parts sawdust to 1 part polyurethane
i made an end grain wood floor from scratch and saved myself 4000
After the tiles and border were set and sealed. I made a mixture of sawdust from my cuttings with polyurethane with a ratio of about 2 parts sawdust to 1 part polyurethane
i made an end grain wood floor from scratch and saved myself 4000
After letting the grout dry for 3 days, figuring that was enough for the 1/8" wide by 1/2" deep channels to fully dry, I went to work on sanding the floor smooth. I used an orbital sander which took 4 hours, I imagine it took much longer than a drum sander would have, but it saved me a step of needing to do the center of the floor and then follow up with an edger.
i made an end grain wood floor from scratch and saved myself 4000
The finished product!
i made an end grain wood floor from scratch and saved myself 4000
I am thrilled with the results and the warm feel or real wood is so much better than the cold feeling of an icy tile, or the disingenuous look of a laminate, which were my second and third, much simpler choices.
i made an end grain wood floor from scratch and saved myself 4000, dining room ideas, diy, flooring, hardwood floors, woodworking projects
Here is a close up of the finished surface.
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info

Top Hometalk Projects

No Way! These Pops of Color Were Made With Dollar Store Items!
11 Unexpected Ways to Use Spices in Your Home
15 Quick and Easy Gift Ideas Using Buttons
16 Creative Ways To Upcycle Pallets
31 Super Cute & Easy DIY Ideas For Your Kitchen
15 Kitchen Updates Under $20
18 Adorable Container Garden Ideas To Copy This Spring
11 Unexpected Ways to Use Spices in Your Home
15 Quick and Easy Gift Ideas Using Buttons
31 Amazing Furniture Flips You Have to See to Believe
15 Kitchen Updates Under $20
17 DIY Projects You Can Start And Finish Tonight
30 Genius Ways To Make The Most Of Your Closet Space
11 Unexpected Ways to Use Spices in Your Home
21 Totally Terrific Things You Can Do With Doilies

To see more: http://goo.gl/pV51hA

Have a question about this project?

3 of 61 questions
  • K
    on Dec 29, 2018

    Hello, & thanks for sharing this project.

    Just for clarification, did you use any adhesive while laying the end-cut tiles? Or just the sealant & grout?

    Could you have waited to seal it until after grouting & sanding, or would the grout have adhered too much to the tiles & not sanded off easily afterwards?

    Thank!

  • Helve
    on Dec 30, 2018

    Beautiful! Would this type of wood stain well? I am planning to change my carpet to wood and love your idea, but want my floors a dark color.


    • Juanita
      on Apr 30, 2019

      Of course, you can stain any wood. The more open grain of the end cuts might accept the color differently than the side grain, so I would definitely experiment with the stain before just jumping in

  • Broke But Happy
    on Jan 28, 2019

    The sawdust mixed with poly... Did you use that as a group or something else? I couldn't tell from this post. Lovely look to the floor, really great job!

Join the conversation

2 of 459 comments
Your comment...