Plain Old Chair Until a Little Mexican Inspiration Hits!
by
Jan's Garden Art
(IC: homeowner)
2 Materials
Medium
I had been wanting to do a "planter chair" for a while and finally found just the right chair to start with.
Check out some of my other projects at:
https://www.facebook.com/JansGardenArt/
Check out some of my other projects at:
https://www.facebook.com/JansGardenArt/
This is how I got this girl. Not in bad shape - but she's in definite need of a make over.
She had some paint chips that needed to come off - So I used Citristrip (safe for indoor use - no harsh fumes).
Dabbed the Citristrip on with a toothbrush to just the areas that needed paint removed. (I used it for spot use on this project - but I've also used it on full pieces. I love this stuff!)
Stripping done but still a bit of a "hot mess". Time for sanding.
Sanded this baby down starting with coarse, then medium, then finally fine grade sandpaper. I didn't "fix" any of her natural "aging" (in other words - I did not fill any cracks or splits - I wanted this girl to look aged, but HOT!)
I determined how big the hole should be....sized it up.
My husband cut the hole out for me. Time to sand the hole.
Checked to make sure the sizing was right by inserting the pot. Time to paint!
I used Valspar Color Radiance spray paint (it's paint & primer in one & drip free) in Flat White to cover the chair.
I then painted the accents, added a few final touches and voila! My Mexican inspired planter chair!
Enjoyed the project?
Suggested materials:
- Citristrip (Lowe's)
- Valspar Color Radiance Flat White (Lowe's)
Published June 8th, 2016 5:08 PM
Comments
Join the conversation
2 of 34 comments
-
Laurie Laurent-Hyland on Jun 14, 2016Pretty!
-
-
Lovesunique on Jul 25, 2019
The accent colors from the pot tie it all together...love it.
-
Frequently asked questions
Have a question about this project?