Wine Rack
This wine rack can be made in one day, here's how!
Best wood glue!
First take two 30 in pallet boards and lay them on a floater (a floater is used to raised boards, I made this one to keep my project off of flat areas)
Next I grab my gorilla glue
Then I clamp the boards together
Then I sand the boards with a 100 grit sand paper
Then I cut 2 blocks at 6 inches each and I spaced them far enough apart so the glass will fit in them nice and snug then I glued and screwed them to the boards at 12 inches down from the top
Then I stained them with a gun stock stain
While the stain is drying I got some old door hooks and spray painted them a glossy black
Here is a better look after they dried
Once everything dried I screwed the hooks to the boards wide enough to fit big bottles of wine and centered them on the boards
Then I added a W that I cut out with a jig saw and I added a piece of black rope with a staple gun so it can be hung on the wall
Then I added a piece of glass between the to blocks and here you have a beautiful wine rack
Frequently asked questions
Have a question about this project?