Suited For Better Things, The Suitcase Upgrade
by
Gary Hardman
(IC: homeowner)
7 Materials
$20
8 Hours
Easy
For several years I have watched people make suitcase tables. It was always on my crafters bucket list but these vintage suitcases were always $20-30 dollars wherever I went. Until last week. JACKPOT!!! Three 1940’s suitcases at an estate sale for $5 each.
So the first step was to gather materials. In the deep recessses of my garage I found old stair spindles and 1x3 pine boards.
Step two I cleaned the suitcase throughly inside and out thinking about how to put together these pieces. I turned the suitcase upside down and started arranging the spindles and wood until I came up with a plan. I decided to box in the spindles at the top and at the bottom.
In step three I measured and cut all the pieces using a small table saw. The pieces fit one inch inside the perimeter of the suitcase providing a solid base. Using two inch finish screws I assembled the top and bottom of the frame encasing the spindles. I learned that if you start all the screws part way into the wood then it’s easier to put pieces together.
Step four. I sanded the frame down. To give the frame a cleaner look I countersunk the finish screws leaving a 1/4th inche crater in the wood. I filled the screw holes and any cracks with Durham’s Water Putty. When dry, I sanded the putty down to the wood. I then painted the frame with Oatmeal chalk paint. A great color to compliment the dark blue suitcase. A coat of finishing wax completed the frame.
Step five. Attach the suitcase to the frame. Using 2 inch screws and washers I drilled through each corner into the top of the 4 spindles. Note to self...do not drill through material. The drill bit caught on the material and ripped the whole bottom out.....Yes cover your ears because swearing was involved. A trip to fabric store, hot gluing material back into bottom and we are finished.
This was a relatively easy project and is now suited for any room in the house. It is also great for storage....
or as a charging station for computers or phones.
Enjoyed the project?
Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Published March 29th, 2018 9:44 AM
Comments
Join the conversation
3 of 59 comments
-
-
Heather Ruiz on Apr 14, 2019
This is by far my fave suitcase table that ive seen, the wood around the legs make it look much more finished. Love it!
-
Gary Hardman on Apr 14, 2019
Thanks Heather
-
-
Frequently asked questions
Have a question about this project?
What did you use to clean the surface of the suitcase?
I'm almost finished with my own suitcase table but what did you use to make it into a charging station?
Thanks!
That is a jackpot! I started one but the bottom needs reinforcing. I planned on using plywood but I dont have a jigsaw to round off the corners. Any thoughts or ideas?