Great Outdated Table Makeover
by
Lori
(IC: homeowner)
8 Materials
$100
5 Days
Easy
I’m sure there are many similar projects like this on this website, but I decided to post this because I wanted to show you how inexpensively you can take an old and outdated piece of wood furniture and make it over beautifully. I paid $50 for this table. It is solid wood and in good condition other than some scratches on the top. This table will last for decades to come and a great piece.
I started this project by thoroughly cleaning this table with mineral spirits. It was very dirty. I bought it from a guy who buys storage units and sells the treasures from them. It had been in storage for a while I think.
Next, I lightly sanded the top of the table with a sanding block. There were some scratches and little gouge. They weren’t deep enough to need wood filler.
I stained the top with a Minwax stain and polyurethane in one. The color is called “Espresso”. I didn’t realize it at the time, but it is an oil-based stain. I chose it because I have never stained anything before and this product doesn’t require stripping the table. It worked out very well and turned out great. It took about 6-7 coats of stain... and the only drawback is the oil-based stain takes a LOT longer to dry. I did a light sanding in-between the first 3 coats to make the stain smoother.
I painted the rest of the table with Valspar Chalky Finish Paint in an off-white color.
It took 3 coats of the chalk paint to completely cover the table. It only takes the chalk paint about 30 minutes to 1 hour to dry between coats. No sanding in between coats.
To give it the “aged“ and “distressed” look I used Valspar’s dark Antiquing Glaze. I basically brushed it on all over with a paint brush and then wiped it off with a dry, lint free rag. The dark glaze was a little too dark for me after it dried, so I dampened a new lint free rag with water and wiped it down again to bring more ith the white color out. The extra glaze comes right off.
The antiquing glaze really brought out the weave pattern in the doors.
I put the doors back on and added the new knobs/hardware.
I bought new hardware on clearance at Lowe’s. These are gorgeous and heavy antique bronze knobs that cost $2 each.
All done!
A great new table that fits into my home decor for far less than buying a new piece.
Enjoyed the project?
Resources for this project:
Valspar dark Antiquing Glaze or Simillar
CHALK PAINT (R) Wax - Clear (500mL) - Annie Sloan - Transparent - Matte finish - Seals and protects furniture
Southern Hills Oil Rubbed Bronze Cabinet Knobs - Pack of 5 - Kitchen Cupboard Knobs, Drawer Cabinet Hardware, Antique Bronze Drawer Pulls, SHKM019-ORB-5
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Published April 29th, 2018 12:53 AM
Comments
Join the conversation
2 of 25 comments
-
Kaleen Wenger Hamm on May 08, 2018
What a fabulous, looking piece, great job
-
-
Kim Cox-Kerby on May 18, 2018
That turned out wonderful, when I first saw it all I could think was Yuk!! Lol You brought it back to life with your creativity, great Job!!
-
Frequently asked questions
Have a question about this project?