Salvaged Bench
There are many examples on Hometalk of benches made from headboards and footboards. I want to add another.
I received the headboard (from a twin, possibly a child's bed) and footboard (probably from a full size bed0 from a friend who knows I am into repurposing).
The headboard had a bit of sculpture to it, being that it wasn't flat. It had a bow and upon sanding it revealed some inlay work. I decided the back of the bench would "bow-in".
Cutting the footboard into three sections yielded the arms and the front seat support. Therefore the front legs and the arms are actually upside down and connected with a mortise joint that was part of the original bed part. The seat side supports are pieces leftover from a previous project and fastened front and back with pocket screws, as are the arms to the back back and the front support to the front legs.
This is a very confusing paragraph. Feel free to ask for further clarification.
I added some two by two supports for the seat.
I don't have an in-process photo, but I used a remnant of a door (left over as part of an earlier project) as the seat.
I formed some filler pieces to cover the gaps between the seat and the bench frame and back. Then there was a lot of filling the pocket screw holes and the voids were the bed brackets had been. Bondo is my go to choice. I also rounded-over the caps on the front legs because originally they were the feet of the bed and flat. A coping saw, a rasp, and a lot of sanding did the job.
I reverted to my standard distressed finish. Prime with red (rusty metal) primer and then paint it with satin black paint. Almost always use oil based paint and sand between coats. One may or may not highlight some edges with 220 grit sandpaper exposing the red primer. Then I top coat everything with rub-on satin polyurethane, so everything has a consistent gloss.
I apologize for not having more detailed photos, but thanks for viewing.
Enjoyed the project?
Suggested materials:
- Salvaged bed parts (A friend)
- Door section and side supports (My inventory)
- Finishing supplies which account for my cost estimate (Menards)
Comments
Join the conversation
-
Larga & Tom Parker on Dec 21, 2018
It's Beautiful, I love it!
-
John Biermacher on Dec 28, 2018
Thank you.
-
-
-
Carol Cole on Jan 06, 2019
It is beautiful. Job well done.
-
John Biermacher on Jan 06, 2019
Thank you. Made me realize I have several similar projects that I just ned to get after.
-
-
Frequently asked questions
Have a question about this project?
Looks great John! I've never thought to use bondo before on wood working project, do you have a secret other than patience for sanding it down afterwards?