Asked on Jul 21, 2019

What primer should I use so that Bondo does not bleed through?

Kathy Gunter LawRobyn GarnerDee
+11

Answered

I fixed all the chips on my wooden entrance door with BONDO. Now I learned that I need a primer to avoid BONDO bleeding through. Any recommendation as it is for outside? Thank you!

11 answers
  • Zinser or Kilz primer should do the job. Good luck!

  • DesertRose
    on Jul 21, 2019

    We found the best is aroma free Kilz primer. One coat then paint over it how ever you want! Great stuff!

  • Megan
    on Jul 21, 2019

    Spraying the spots with Shellac should also prevent bleed through. :)

  • Vickip322
    on Jul 21, 2019

    Zinnzer with Bin, I used this on my cherry cabinets. It has shellac in it, and prevents bleeding!!!

    • Vickip322
      on Jul 21, 2019

      I did my cherry cabinets in the kitchen, painted them gray! They came out beautiful, I used a small roller, and the wood grain actually showed though, and smaller spots I used a small angled soft brush. I didn't sand anything, I used primer, and regular paint. I get so many compliments on them!

  • Jan Clark
    on Jul 21, 2019

    Nice job! Primer works by sealing the surface to prevent bleed. I do like Kilz because it doesn't allow spores to develop between the wood and primer. Works great for outside - just remember to use an exterior paint for the top coats.

  • Sarah Parker
    on Jul 21, 2019

    Hi, would like to use Fushion Mineral Paint. Do you have any experience with this paint? Thank you!

  • John Biermacher
    on Jul 21, 2019

    The previous suggestions are good. Sometimes it is a texture issue rather than bleed through. I have used a couple techniques.


    1) I think it is called glazing putty or spot putty, It is typically used for autobady repair. It is a very fine grained filler that comes in a tube, similar to tooth paste. Good news: it it provides an extremely smooth surface, filling in any scratches/small imperfections in the Bondo. Bad News: it take awhile (overnight) to set up before it can be sanded smooth with very fine sandpaper (220 or higher).


    2 Use multiple coats of primer and sand with very fine sandpaper in between coats, before applying finish coats.


    Good luck.

  • William
    on Jul 21, 2019

    Kilz primer.

  • Dee
    on Jul 21, 2019

    Kilz 2 is a bonding, stain blocking primer. I would use a rubber roller made for flat surfaces. You can get them at Home Depot of Lowes. You need to use exterior paint. I find SHerwin Williams [use a 30% off coupon] and Benjamin Moore make a great exterior paint. Expensive yes, but it lasts for years.

  • Robyn Garner
    on Jul 21, 2019

    I think you should use a spray primer over the Bondo. You will not have a single brush stroke doing this.


    Quick sanding with steel wool or very fine sandpaper might be needed if you were too heavy handed with the paint, otherwise you can literally spray and go (once it's dry of course). I honestly have not had the best results with Kilz or BIN 1-2-3. If it were me, I think I'd go with an exterior Rustoleum spray product. The have primers made to go over Bondo but you'll need to read the label or perhaps call them about your wood door. I really can't imagine it would be an issue though.

  • Kathy Gunter Law
    on Jul 22, 2019

    Since this is an exterior door, I would highly recommend Kilz original (oil based). Especially if it is exposed to the elements. Then use a good door paint. Sherwin Williams would be your best product in my opinion. If you can get there before end of day July 22, they have 40% off. But you can usually get 30% most of the time. It's worth the extra $ IMHO.

Your comment...