What can I do if the paint on my vanity drawers are peeling?
The paint on my bathroom vanity drawers and doors are peeling.what should i do
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
How can I refinish my bathroom vanity without stripping?
My vanity has places where the finish is worn off from water splashes. The current finish is clear on oak and looks yellow. I do not want paint it but would like the... See more
What can I do about my sink? The water splashes everywhere!
I have a very shallow sink and when I turn the water on it splashes everywhere. Is there some kind of faucet that will help?
Lightly sand the vanity then prime and paint.
Hi Judy! I would lightly sand them with 220 grit until smooth. Then use a chalk based or mineral paint to repaint cabinets. :)
DIxie Belle is great for cabinets and so is Annie Sloan!
https://letspaintfurniture.com/how-to-paint-kitchen-cabinets-white/
If you are looking to repaint - I recently discovered Oil Bond (you can get it here on Amazon https://amzn.to/2wGmiNO) where you rub this first on your cabinets. This helps the paint stick so you DON'T NEED TO SAND!! Also add a bit of Oil Bond to your paint. I would also spend a bit more for specific cabinet paint to ensure a smooth finish. I recently did this on my bathroom vanity and it turned out fantastic! Here are my pics of my project: https://wp.me/pUbK5-yRy No peeling after I used Oil Bond!
I recommend a paint with a higher sheen. The paint may be peeling from the humidity in the bathroom. A higher sheen can handle the humidity better and won't peel.
Hi July, the moisture in the washroom has likely caused this, and the vanity may not have been properly prepped before painting. Hope this helps you out, it has step by step instruction
https://www.youtube.com/watch?v=l4mN-hfvUHA