How can I make over this rocking chair that I found in the garbage?
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
How can I makeover this stool? I can't get it apart!
I have 5 of these stools and can't get them apart to remove the seat back. The situpon cushion can be unscrewed - but not so the back part. I'm getting so frustrated ... See more
How can I make over a hutch to make it a bar?
Turn a hutch into a bar
This will look great painted up white with a slash of colour on the seat and back.
She's a beauty Mia. Here's a lovely video that will give you some helpful tips on how to refresh her - https://www.youtube.com/watch?v=7Yw4hOagH2c
If the woven wicker part is in good shape and not saggy, use it like plastic canvas with some bulky yarn!
it's a Bentwood rocking chair; you can order the cane replacement material on Amazon. Or upholster it.... many options: https://www.google.com/search?tbm=isch&sxsrf=ACYBGNRFkkyymelkGYJhosHqIr6X8sRbPA%3A1573742569602&sa=1&ei=6WfNXd6lJJLB-wTbxr6wBQ&q=bentwood+rocking+chair+makeover&oq=bentwood+rocking+chair&gs_l=img.1.0.35i39j0l6j0i7i30l3.77441.81440..82873...6.0..0.161.1890.0j13......0....1..gws-wiz-img.vv3c_LsxU9I
I would clean it up and paint it white. It looks like there is a bit of damage. You can fill it in with Durham's and smooth before priming and painting.
I would remove the cane. It's beyond repair. Paint the frame. Make some cushions with a plywood back/bottom for the seat and back. Screw them to the frame.
Clean the chair and remove all ripped caning from the seat, taking care to pull out the spline and cane from the groove in the seat frame without damaging the frame's wood.2
Strip the old varnish, paint or stain off the wood chair frame. Apply commercial stripper, and follow manufacturer's instructions for letting it penetrate the old finish to loosen it. Scrape the old finish off. Use a plastic putty knife to avoid scratching or gouging the wood. Use the knife edge to get into tight seams. Reapply stripper to any areas that still show old finish.3
Lightly hand-sand the wood with fine-grade sandpaper. Pick any remaining bits of glue and cane out of the groove in the seat. Wipe down the rocker to remove dust and bits of fiber. Mask the cane back with painter's tape, if you are not replacing it, so no new stain or finish will mar it.4
Stain the rocker all over. Or, for a natural look, protect the stripped and sanded wood with a coat of clear matte or glossy polyurethane. If the first coat of stain produces the color you want, let the stain dry, and then apply the clear protective finish. Carefully apply a second coat of stain to deepen a too-pale rocker to the color you prefer before finishing with the final protective clear coat.
Fix the Seat
1Cane the rocker seat using a piece of machine-woven cane from a craft supply or woodworker's shop. Purchase a length of reed spline to secure the woven cane at the same time. Get larger pieces of woven cane and of reed spline than you need for the area of the seat and the perimeter to be tamped down.2
Soak the cane in hot water for about 30 minutes to soften the stiff fibers. Lay the pliable cane over the chair seat. Use a caning wedge and a hammer to gradually tap the cane into the groove that runs along the perimeter of the seat. Once the cane is wedged securely into the groove and is taut across the seat opening, trim the excess with a box cutter.3
Squeeze a line of wood glue around the groove holding the cane, and tap the reed spline into the groove to secure the cane and neatly finish off the seat edge. Wipe any excess glue off the chair frame and let the glue dry. Wait a day or so before putting your refinished rocker back into service, to be sure the seat is strongly bonded to the chair frame.
I did exactly what William said. It was much more comfy than cane. Rocked all 5 of my babies, then I gave it to a new Mom.
Just to say what a lovley chair!!.. One lady says a beauty i must agree. William sounds very helpfull as do all the rest..please upload a pic a your finised project...im sure you will make it even more beautiful. :)
Hello,
Spray paint it or brush paint it, replace broken cane panels with new (from craft shop - comes on a roll) or replace with MDF board and upholster. Take a picture with you to the Craft shop and they will help you.
Home and Garden DIY Ideas | Hometalk
https://www.hometalk.com/diy/bedroom/furniture/old-rocking-chair-gets-a-remodel-44357044
Old Rocking Chair Gets a Remodel
Hi, You could paint it Upholster it, do half and half, add cushions etc.
i would do upholstery to makeover that chair