For this project you will need:
-An old wooden wall mounted paper towel holder or a ¾” dowel about 18” long.
-Kraft paper roll or masking paper (length can vary)
-Paint of choice (Most paints should work)
-Hammer and Nail (to hang your project)
1) Dowel Style Dispenser
I decided that although one of these dispensers would suffice, I would create two just in case you are unable to find the right kind of paper towel dispenser. The first way is to use a ¾” wide wooden dowel that is about 18” long. Mine was already the correct size so I did not need to cut it down but you can easily cut it down to the correct size at your local hardware store. I simply drilled a hole on either end of the dowel about an inch in from each end.