How can I fix peeling laminate floor tiles?
I have off white laminate floor tiles that over the last few months have really started bubbling and peeling on top. You know, the wax like protective coating. Is there a way to fix or at least mask the damage outside of a rug u til I can replace the floor? I live in Hawaii so I’m sure the humidity coupled with mopping isn’t helping. I try to try the floor right away, but I feel it’s just getting worse .
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How can I fix the edges of my laminated floor that my dog peed on ?
My little dog misses his aim on the pee pad and wets on our laminated floor. Is there any way to fix it where it's lifting, without replacing that panel ? Thank you... See more
Can I fix laminate flooring that has chipped and peeled on the top?
We have laminate flooring throughout the main living areas and under the desk where your feet go there is a spot that started flaking and has now peeled at the top. I... See more
It sounds like it needs to be replaced. If it's wax, a vinegar and water solution should remove it.
Hi P,
Is it from the coating that happens when waxing the floor? If so, I remember many years of removing the wax coating with ammonia. :( If it's the laminate itself that is deteriorating, it will need to be replaced. Wishing you the best.
I've never actually seen this, but I imagine the salt air has also contributed to the issue. Based on other problems I've dealt with on fiberglass or painted surfaces, I would probably try to remove all loose material and then gently sand the rough edges with very fine sandpaper. This should at least slow the peeling. I've found that loose areas trap moisture and speed peeling, so eliminating the loose material should mitigate the issue temporarily.
Once the areas are smoothed, I would consider painting and sealing it until it can be replaced.
You've gotten some good answers already. I just wanted to recommend having a dehumidifier once you've implemented whatever solution you choose. If you think it's related to humidity, this could help preserve your repaired/replaced floor.
I would pull it up and replace. I think any fix will work permanently
https://homeguides.sfgate.com/fix-linoleum-thats-peeling-up-20802.html
Laminate flooring is manufactured with a layered construction using several layers pressed together. The lamination process uses heat and high pressure to fuse the materials together, resulting in a solid piece of flooring.
It sounds to me that the top overlay of your flooring is disintegrating. Unfortunately, there is no way that this can be repaired.
I'm not sure there's much you can do to keep it from peeling now that it's started. You might look into using a floor wax (research that with the flooring manufacturer). That might put a good protection over the top and keep the rest from peeling,. But depending on where you live on the island the salt air and humidity might prove too much for that as well.
Try sticking it down with a suitable adhesive (ask at DIY store) Then place heavy weight on it for 24hrs till stuck!
See if you can take the tiles out and replace. I am currently doing the same thing. It is a tedious job, but so far worth it.
Beginning at the wall, pry up the boards until you reach the ones that are damaged. As needed, swap them out one by one. The tongue of the replacement board should fit into the groove of the original, undamaged board to allow it to snap into place. Use finishing nails to reinstall the baseboards or molding to complete the repair.