How do I make letters with old palettes?
Related Discussions
How do I make a room divider out of old doors without spending a lot o
I need to make a room divider. For next to nothing! I saw on market place antique doors for $5 each . but they were solid wood and I imagine heavy. Any ideas or sugge... See more
What can I do to an old organ to make it useful for something?
Anyone have ideas on how to repurpose potato chip canisters?
I'm looking for ideas on how to repurpose potato chip canisters other than storing food in them.
What should I do with this rusty bucket?
I love rusty junk. So when I saw this bucket at a yard sale I liked it too much to pass it up. The question now is, what do I do with it? My only thought is to turn i... See more
Creative uses for empty cat litter buckets, anyone?
Does anyone have any ideas of things to do with empty cat litter plastic buckets? I did take a foam square and covered the bucket and foam with fabric to make a quick... See more
Recycling Cat Food Cans
We now live in a rural area with no trash pickup. I am separating our trash and doing what I can to compost, feed the chickens, burn or store to take to the dump. I... See more
Pallets- where can I get them?
I've been to 2 Home Depots in my town and neither would allow me to take even ONE- where is everyone in the DIY WORLD GETTING THEM?
HOW TO MAKE A PALLET WOOD LETTER
https://thistlewoodfarms.com/how-to-make-a-pallet-wood-letter/
RUSTIC INDUSTRIAL LETTERS MADE FROM WOOD PALLETS AND OLD BLINDShttps://www.remodelaholic.com/rustic-industrial-letters-wood-pallets-blinds/
There are good instructions here:
https://diyhuntress.com/diy-pallet-wood-letter-first-youtube-video/
Just pull the pallets apart to free up the individual boards and use as you wish.
Hello Luis,
Draw freehand or use clear letter shapes as guide. Then cut out the letters with a jig saw. I have given the advice assuming you want spaces incorporated in the letters! If you you do not want spaces, then disassemble the pallets. Re assemble them as on flat board., and cut out your letters. Hope that helps.
Hi Luis, you can trace the letters of the alphabet onto pallets and use a jigsaw or scroll saw to cut them out. If you're looking for a way to use pallet letters and turn them into a shelf you may enjoy this tutorial for a HOME letters pallet shelf - https://acraftymix.com/blog/home-shelf/
Probably the easiest way to use the old wood. Cut letters out with jig saw.
Here's a post that might help you - https://thistlewoodfarms.com/how-to-make-a-pallet-wood-letter/
Use your computer to find the font and size you like. Then use a pen and press hard to trace the numbers onto the wood. You can then use a jig saw or just paint the letters on the wood with no cutting.
This will help: https://www.youtube.com/watch?v=MDnY2HiCZWI
I recently saw this YT video and it is so cute. https://www.youtube.com/watch?v=MDnY2HiCZWI
I would take all the slats apart take all the staples out then get a saw hammer and nails and then place on a table and start arranging them the way you want then nail together
Here is a video tutorial for you: https://www.youtube.com/watch?v=OwE8I60-0dc