What type of hardware is used to hang a canvas french? window shade??
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
Does anyone know how to make a balloon garland or a balloon arch?
How to save a vintage sticker?
How can I preserve a 100 year old sticker on a glass pane. It is an old Pacific Telegraph and Telephone sticker on a door from a building that burned. The door and ... See more
Can you use E6000 to attach rhinestones to a plastic squeeze bottle?
I purchased small 2oz. plastic flip top squeeze bottles to use for hand sanitizer that I plan to bling with rhinestones and give as small Christmas gifts.I was wonder... See more
What adhesive should I use to attach wood trim to a mirror?
I am placing wood trim on the edge of a mirror. What adhesive or adhesive tape would be best to use
How do I make a wreath and hanger for a gravestone??
i want to place wreaths on my family members' gravestones at our Church cemetery, much like is done at Arlington National Cemetery on special occasions. I need ideas ... See more
How do I attach legs to large tray?
I have a very large, heavy, oval silverplated butler’s tray that I want to attach metal legs to, to make an end table or small coffee table. I don’t know how to a... See more
Here you go:
https://visualhunt.com/french-door-curtain-rods
I used rods both top and bottom that were fastened to the door. Changed the treatment with the seasons.
Any big box hardware store, some craft stores like Hobby Lobby, Bed Bath and Beyond, or any store that sells window treatments.
Home Goods, Tuesday Morning and Ikea sell the hardware you would need. I am sure HD and Lowes does too, but much more expensive
https://www.amazon.com/canvas-hanging-hardware/s?k=canvas+hanging+hardware
I would check in your local home improvement store or on Amazon.
Here's a post that might help https://laurelberninteriors.com/2019/09/25/curtain-and-drapery-hardware-what-you-need-to-know/
Hi Gwen, hope these help you out,
https://www.youtube.com/watch?v=jo73_q6lUYs
https://www.youtube.com/watch?v=aD_3Msg0AoA
Here you go:
Measure the width and height of each window to be covered. The finished height should extend at least two or three inches beyond the glass evenly at the top and bottom to allow for clearance of the sash rod and stitching details.
Insert the sash rods through the rod pockets at the top and bottom of the panel and attach mounting brackets to both ends of the rod. Arrange headings and pocket seams neatly across the rod to evenly distribute fullness as needed.
Measure and center the uninstalled panel, marking the bracket screw holes with a pencil or pen. Align the brackets symmetrically on all four corners of the glass by evenly distributing the headings and pockets on top and bottom and stretching the panel tightly to avoid fabric sags. Use a level and tape measure to confirm that all pencil marks are square and evenly proportioned with each other and adjacent windows, both horizontally and vertically.
Using a cordless drill, attach the two top brackets to the door at the pencil marks with appropriate screws, and insert brackets on both ends of the rod according to product instructions. Stretch the panel tightly and align the bottom rod brackets with the pre-measured holes to confirm proper alignment. Attach the bottom brackets to the door with appropriate screws and insert the rod ends, duplicating the process at top and bottom for each rod pocket panel. Arrange gathers and headings evenly between top and bottom rods.
The rod and brackets are easy to come by, visit any home treatment store.
Hello,
Metal Hooks and Eyes, or Brackets or Screws.
Perhaps some of these pictures will help:
https://www.diynetwork.com/made-and-remade/make-it/how-to-make-curtains-from-canvas-or-dropcloth
Thanks so much to everyone!
I got it hung!!! YaY!!!!