This is of the frame.
Whats happening with my window frame and windowsill??
I'm doing a deep clean of my house to get rid of all the nicotine staining since I've recently stopped smoking. I was prepping my window frame and Sill for TSP. Just wiping it down with a little soap water and scrubbing lightly. All the sudden I noticed little fibers building up on the rag. I thought it was just the many years of nicotine build up, then o realized it was actually little pieces lf wood.
It's my bay window in my living room. I have attached pictures of it. One where I haven't tried to clean, one where I have tried to clean of the frame and one of the windowsill.
What's happening or why? How do fix it? PLEASE HELP! THANK YOU.
Not as bad as the frame but still happening. This is the windowsill.
Full windowsill. I didn't try to clean it yet in this picture.
What the frame looked like before I tried cleaning it.
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
Tips for updating or repairing Pella between the glass blinds?
Our 14 year old cord controlled blinds are all giving us trouble with raising and lowering and tilting. Many of the top mechanisms are coming unglued from the top. I ... See more
Brr! Drafty windows- how to cut the draft?
I have 3 sets of windows configured like this...very drafty, How to you winterize them? There is nothing in the corner to stick tape to. Thank you
It looks like water damage. The water has seeped into the fibers of the wood. If the wood isn't rotted, you can sand, restain, and seal it.
First off, best to you on quitting smoking, this had to be difficult and the benefits are for the best.
This looks like water or moisture damage where the water from the glass window has run down and seeped into the wood causing the fibers of it to raise up. If it is superficial and can be sanded off, sand and restain, Then apply a sealer to block this process.
One thing to consider is keeping better air flow to the window and wipe dry when you see condensation. It is hard to tell if these are double pane window glass you have. The better the quality window (R factor), the more resistance you'll have for the condensation occurring.
I also agree that it looks like water damage. Do your windows get moisture between the panes in cold weather (if it's double-paned glass)??? If so, it means the seal between the panes has failed and requires window replacement. Have those windows been left open when rain has come in???
Water/moisture is invading from somewhere!
I would say water damage since the wood is so fragile. If the bay window has been installed since you move in, I'd contact the manufacturer to see if a seal is broken.
you would need to pull those pieces out to see if there is water damage underneath or moisture - and then repair or replace those pieces once the water issues are addressed
Looks like water damage to me. It may just be from moisture on your window, but their might be moisture beneath this trim.
Hello, you can fix this quite easily, hope this helps you out
https://www.doityourself.com/stry/how-to-repair-water-damaged-window-casings#:~:text=Wood%20putty%20is%20the%20best,putty%20knife%20that%20is%20flexible.
Sand smooth. Use a rag with a small bit of stain to match and rub in. Use as little as possible. You can always add a second coat. Seal with a poly that is water proof.
Looks like dry rot. The wood is just dried out from UV rays. Sealer has is gone in some spots. Maybe some water stains from plants. You would need to sand down the wood smooth. Seal with three coats of a water based polyurethane.
The finish has been removed and you are into the bare wood. You can sand it smooth then paint or stain & seal.
Here's a post that might help https://www.bestpickreports.com/blog/post/leaking-window-frames-heres-what-to-do/
I had the same water damage. Rather than trying to restore it. I bought ceramic tiles and used thin set and put them on my window sill. I love it, because my window sill is wide and now I can put plants on that sill and not have to worry about water. I grouted, and it looks fabulous.
I agree with sanding it down a bit and add a new sealer on top.
I would just lightly sand it down and stain the same color
Trina, Now that "we" are pretty sure of the diagnosis and fix....
I think Dee's idea is fabulous! You don't have to restrict yourself to square ceramic tiles, you could create a fabulous window seat in the style you love! Envision what sort of "design" you'd love to see on a wall like your shower but transfer that to use on a horizontal surface. Or, you could purchase a stone or quartz "cut off" (super cheap) and then other coordinating tiles to put around it. Or, you could replace it with a species of wood you'd love to see on a bench, you could paint out the trim in black to update it all - your possibilities are endless!
You would need to smoothen these by sanding them down and just paint or stain them.
In my opinion, don't try to fix it by yourself. Please contact an experienced person or your contractor to fix it. I'm told this is because when I faced a problem with the roller shades in my home I tried to fix it by myself and turn it into a big disaster. Actually, it was just a matter of minutes to the contractor which turned it into an hour.