Rusty Bedsprings Marquee Lights!
by
Country Design Home
(IC: blogger)
Got an old rusty antique bedspring hanging around? How about making a Lighted Marquee sign?? I created this one with a twin-sized rusted bedspring, some paint and some clear globe patio lights from Target. For the complete DIY instructions, go to:
Got a piece of lightweight plywood from Home Depot and had it cut to a size that was two inches bigger all around than the bedsprings.
Then I built a frame from 2 x 4's and attached to the back of the plywood. This gave me something to screw the brackets into that would hold the bedframe in place.
Measured out the spaces for the holes to be drilled. Each hole is centered in the middle of the bedspring coil. There are 11 across and 6 down, so 66 holes in all.
Here are the holes drilled into the wood under each coil.
I painted the plywood a dark gray to show off the lights when the board is lit.
I painted the steel attachments brackets and screws rusty brown to match the bedframe.
These are clear globe patio lights from Target. Love them!
Here is the bedspring attached to the painted board with all of the light sockets in place under the coils.
The completed light board display hanging in the barn. For complete instructions, please visit my blog at:
Enjoyed the project?
Want more details about this and other DIY projects? Check out my blog post!
Published September 1st, 2014 9:48 AM
Comments
Join the conversation
3 of 24 comments
-
Bryan's Workshop on Dec 12, 2017
WOW! My eyeballs just flew out of my head and hit the computer. This is amazing and you are awesome!!
-
-
Kevin on Apr 14, 2020
This looks GREAT!
i bet it was a lot of work to strip the bed springs of ALL of the stuffing, padding, cotton, cloth, whatever is inside the mattress?
Kevin
-
Frequently asked questions
Have a question about this project?