Build A Porch Swing
by
SimplyDesigning
(IC: blogger)
We recently got the crazy idea to tear out our porch bench and build a porch swing and today, I am going to show you how we did it. Oh and the best part is that I only needed to purchase (1) 24 for my swing, rope and a few pieces of hardware to make this work. That's because we were able to re-use the wood from our bench and our deck to create this beautiful porch swing! Isn't that the best!?
We all love porch swings and this one is a comfortable spot for reading a book or just enjoying a warm afternoon. Here's what we needed to make this happen.
First we used the 2 x 6 frame boards to build the bottom frame with the 4 x 4 corner post in each corner. We used screws to attach the 2 x 6 directly into the 4 x 4 corner posts.
We attached the three 2 x 6 vertical back support boards onto the frame with screws
We added the trim around the bottom of the 4 x 4 arm rest supports using a nail gun.
I simply filled my FinishMax with stain (no need to thin stain) and went to work staining my bench!
Now comes the final step! Simply run your rope through the eye screws in the bench and tie two knots to keep the bench in place. We tied the rope so that the swing tilted back ever so slightly and so that it was at a comfortable height.
For plans and detailed instructions - please visit my blog by clicking the link provided.
Enjoyed the project?
Want more details about this and other DIY projects? Check out my blog post!
Published September 7th, 2015 12:00 PM
Comments
Join the conversation
2 of 12 comments
Frequently asked questions
Have a question about this project?