Let's Play Ball!
Repurposing an electronics hard case into a functional table with a little flare!
Started with cleaning up the outside with Goof Off wipes and sanding and filing holes on the inside.
Then the fun started!
I Mod Podged baseball cards to the inside, then sealed!
And used E6000 to glue the cards to the hard plastic case. Then Mod Podge over the top of the cards and sealed.
The person who I was making it for, wanted it to be functional, so I added resin on the top of the case for easy cleaning and added hair pin legs for a table.
Published May 6th, 2014 1:28 PM
2 of 4 comments