How to Install Barn Beams on a Ceiling

8 Materials
$200
8 Hours
Advanced

Learn how to install barn beams on a ceiling with this DIY tutorial!

How to Install Barn Beams on a Ceiling

In our French Country cottage fixer upper, I decided to try my hand at incorporating old barn beams into the design. One of the places I used barn beams was our master bedroom.


I wanted to open up the standard double closet with bi-fold doors into the rest of the bedroom and create an open concept closet design by framing out the space with barn beams.


In this case we used the same technique to install the barn beams on the walls as well.

How to Install Barn Beams on a Ceiling

Tools You Will Need:

  • Circular saw
  • Chain saw
  • 2×4 lumber
  • Hammer
  • Chisel
  • Drill
  • Star bit wood screws
  • Ladder

How to Install Barn Beams on a Ceiling

The first step is to cut the beam to the length and thickness that you want. The less cuts you need to make with the circular saw the better!


 


How to Install Barn Beams on a Ceiling



Run your circular saw lengthwise down the center of the beam in 1/2 inch to 1 inch strips. Leave approximately 1-2 inches uncut on either side. Make sure the opening will be wide enough to recess a 2×4 or whatever lumber you are anchoring your beam to! It will ultimately form a U when you are finished with step

How to Install Barn Beams on a Ceiling

Here is where you want a sharp chisel, your hammer, good working gloves, and a healthy dose of patience. Just think the last time these beams were installed they didn’t even have electric tools!

Remember the U shape needs to be big enough to recess a 2 x 4 or whatever lumber you will be anchoring it to the ceiling with.


How to Install Barn Beams on a Ceiling

Unfortunately in our closet project somehow I missed taking a picture of this step, so I am showing an example from Jenna Sue Design to show you what I am talking about.  


In this kitchen they are showing you how to create a faux barn beam which is also a great option and much easier to customize to your preferred size, stain etc. The concept, however, is the same. See the 1×4 they have running across the ceiling? 


That is what we did with the 2×4 across the top of our closet ceiling. Anchor the 2×4 with star bit wood screws and make sure to hit studs! The 2×4 then recesses into the U of the beam that was notched out.


How to Install Barn Beams on a Ceiling


This is a close up of the star bit wood screws. We used these on the ceiling beam and the wall beams. You screw them directly into the barn beam and then drive it into the 2×4’s you have anchored to the ceiling.

You can certainly add other beams as you want. We added a vertical beam to in the center of the closet, but this was only decorative so as to visually split the closet in half for a “his and hers” side.



Pin any of the images below for later!


Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info

Ahna Fulmer // Hammers N Hugs
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

  1 question
  • Nancy Nancy on Feb 17, 2021

    Do you plan to add a couple more beams to the ceiling in that room? And I assumed you were going to finish by adding barn doors to cover the contents of the closet. Do you plan to leave everything showing?

Comments

Join the conversation

2 of 11 comments
  • Terry Terry on Feb 18, 2021

    Less wastage of the wood by cutting lengthwise slices and gluing the wood to make a 3 sided box.

  • Lisa West Lisa West on Feb 24, 2021

    looks great. I myself would add barn doors. Yours looks great with out the doors.

Next