How do you remove a stain from a Kohler non slip shower base?

Here's a recipe for a cleaner that may help: https://www.hunker.com/13416851/how-to-remove-stains-in-a-cast-iron-bathtub Good Luck!

Have you tried magic eraser ?

Barkeeper's friend and a soft brush.

Barkeeper's friend or ox-clean will work. Make a paste and let it sit for a bit. Then scrub and rinse. It should work.

Sometimes peroxide on a well-soaked cloth applied to the stain and left for 1/2-1 hour can work wonders.

Have you tried wet & forget shower? I have a non slip tip and I hate it but wet & forget eventually got it clean. I used it 2x a week for about a month to get it 100% clean.

Since they are textured, use a stiff bruch and a mixture of TSP in water -- ask at your hardware store -- strong cleaning powder.

I would try a product called Cerama Bryte. It's non scratch but made for glass top stoves, so it's tough, but won't hurt the finish.

To clean its porcelain and non-skid finishes, Kohler suggests using just three products: Tilex Bathroom Cleaner, Clorox Disinfecting Bathroom Cleaner, and R.O.G. 3 Bathtub and Shower Cleaner. R.O.G.

Hi Dianne, hope this helps you. Use a mix of 2 cups bleach with 2 cups cup of water, plug the drain and let the bleach solution soak on it for about 1/2 hour, scrub with a brush if needed and rinse well.

Wet and forget shower clean, it will work, but not with 1 application.

Depending on how old or well used the bath is, could be it needs re- finishing or changing up for a new one. Give Barkeepers Friend a go first though!

Kohler recommends cleaning your shower tray with hot soapy water and the tray should be wiped dry with a lint free cloth. You can also use a soft brush to clean an anti-slip tray.