Pizza Pan Wreath

5 Materials
1 Hour

I have seen these pizza pan wreaths before and truthfully I was never a fan. So I decided to challenge myself to make one myself! This way, I could add whatever I liked to the wreath.

Let me know what you think! Let's get started!

You’ll need a pizza pan like this. I picked mine up at the Dollar Tree.

I used this contract paper that I had left over from another project. You can find it at Walmart or on Amazon.

I took the contact paper and covered one side of the pan. I pushed my finger hard along the edge to mark where to cut.

I had to piece mine together because as I said, this was leftovers.

Just peel the backing off and apply

This is how it looks once it's all applied.

Next I gather some things I had around the house to decorate it:




Artificial boxwood

I decided to go for a Farmhouse look.

I then laid it out on the one side.

And tied it all together with twine.

I then drilled a hole on that side.

I pulled some twine though the hole and applied the cluster I had tied together so it would stay on tight.

I then used some vinyl words in white on the front.

I love how it came out! Can you tell it was a pizza pan? Share your thoughts below. This only cost a couple of bucks because I had almost everything on hand.

You can see more of my tutorials at Gilbert Marketplace on Facebook and Youtube.

Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info

Frequently asked questions

Have a question about this project?


Join the conversation

4 of 7 comments