How do I replace wicker drawer pulls?
by
Peggy
+15
How can I replace broken drawer pulls on a small wicker chest?
Related Discussions
Suggested Project Book
Hello. Can you post a picture of your wicker chest? Amazon has a pretty large selection of pulls but I’m not sure what the ones you’re trying to replace look like. There are also some restoration component companies for steamer trunks it have replacement leather pulls but I am not sure if that would be an option.
Measure the current pulls. You will need to know the distance from the middle of one screw to the middle of the second screw on the handles. This will help you to search for the right size.
You will probably need to reenforce the section behind the pulls. Wicker has a tendency to weaken. Perhaps a piece of luan added to the inside of the drawer.
You can also use large washers on the inside.
Maybe this is what you are looking for:
https://www.ebay.com/p/2250458868
Peggy...can you send a picture of the pulls please..thank you
Hi Peggy. I'm Cindy. You could use a leather belt (ladies or mens) to make the handles on your chest. Remove the hardware first and then cut the belt in pieces as long enough to create handles.
Hi Peggy
Hope this helps you out.
https://www.apartmenttherapy.com/how-to-upgrade-drawer-knobs-pulls-and-handles-220169
https://arthurharris.com/news/how-to-choose-cabinet-hardware-size/
Many home improvement stores have sections with extra drawer pulls. You could try to find replacements there. Try putting cardboard behind the pull to help keep it in place if the wicker is fraying at all.
Peggy: you might be able to use rope! ...and tie knots inside of the drawer fronts
Old Boat rope should work.
The should unscrew on the inside. If not cut them off with a saw and replace with handles that have two fittings places. If you hadn't thought l you could Paint them or stain them or cover them with fabric.