How To Make A Dragonfly Out Of Ceiling Fan Blades...

7 Materials
$16.00
3 Hours
Easy

Supplies Needed:

  • Spindle
  • Top Fence Post
  • 4 Ceiling Fan Blades
  • Item For The Eyes
  • Item For The Antenna
  • finial for the tail
  • Paint

After seeing a picture of dragonflies made out of ceiling fan blades, I had to make one. I had a box in the attic containing four fan blades. I wanted my dragonfly to look like it was made out of ceiling fan blades, so I didn't cut the blades down. I left the fan blade brackets on. I loved the design, so it was a win win!

I wanted to paint the wicker insert a different color than the outer part of the fan blade. I wrapped the blade in newspaper and cut the wicker section out. While the fan blades were drying, I painted the spindle. I forgot to take a picture. Sometimes I get totally involved, and forget to take pictures!

After the spindle was dry. I drilled a hole on top of the spindle where the head would be attached.

For the dragonfly head, I used a top fence post. I painted it the same color as the dragonfly body. After the fence post was dry, A hole was drilled on top of the fence post for the antenna.

I used two white ceiling light caps that I painted yellow for the eyes. Little screws were used for the pupils.


For the Antenna, I used a lamp shade harp off of a old lamp.  

The fan blade brackets were attached to the spindle.

At the last minute I decided to use a finial for the tail of the dragonfly.

Since I decided to use a finial for the tail, Two inches were cut off of the spindle so the dragonfly wouldn’t be too long in length for the fence that I was mounting it on.  

The finished product! I'm pleased with how it turned out.

Suggested materials:
  • Spindle
  • Top Fence Post
  • 4 Ceiling Fan Blades
See all materials
Frequently asked questions
Have a question about this project?
3 of 10 questions
Comments
Join the conversation
7 of 79 comments
  • I love these! I have made about fifty of these but do not use the hardware that comes with the fan blades! I give them all away as gifts. Here are 2 of my red, white and blue ones and one purple one with lots of bling! The photo doesn't do justice! I love to re-purpose, too! Great job on yours! ;-)

    • See 4 previous
    • Sarah M Sarah M on May 20, 2021

      we used screws to attach the dragonfly to the fence.

  • Bla69114539 Bla69114539 3 days ago

    I am going to make one. But the eyes will be much bigger. The wings shaped true to a dragonfly wings . I have studied them carefully. Have made beaded ones. Printed a chart of the many types and sizes too. I also have the National Audobon Society Field Guide to Insects & Spiders. There are wonderful pictures of the Dragonflies there. Hope I can post a picture of it when I am done. Thanks for the idea !

Next