Front Door Makeover Using Liquid Wood - From Boring To Stained Wood

5 Materials
$36
90 Minutes
Medium

I've always wanted a stained wood door, but my goodness are they expensive! And, our door was already in really good condition, so we definitely NEED a new one!

To get the look that I really wanted without having to spend much, I turned to Retique It, a liquid wood product that you paint on and then stain.


*You can find all of the products used in this tutorial in our Etsy shop which we've linked towards the end of the tutorial.


*Time listed is for work time only, does not include dry times


*Price listed is for the amount of product used, not the initial cost. You will have plenty of product leftover for more projects

Before and After

A little information about Retique It Liquid Wood -

Retique It looks and feels like real wood because it is real wood! Retique It is made with 65% recycled wood fibers, so you really are painting with wood!

Retique it is waterbased

It has very little to no odor

It can be used on just about any hard surface - metal doors, glass top tables, cabinets, previously painted surfaces, MDF, plastic, laminate countertops...I could go on and on 😆

It comes in multiple colors and along with their waterbased gel stains, you can achieve any wood color such as oak, mahogany, walnut, teak, cherry, driftwood ect..

There are multiple ways to apply Retique It, but this is the most common -

You first apply your base color. This will be the color that peaks through as the "grain". Typically, you apply two coats of your base color.

Then, you apply your contrasting color and immediately run the graining tool through it

Then, stain and seal 😊

Here is a quick video showing you the steps

First, you need to scrub the door. Use dish soap and water, and scrub extra well. Then rinse it off with water and allow to dry. Do a quick scuff sand using 220 grit sandpaper. Then wipe with water again

If there is any grease, cleaner residue, dirt or grime left behind, it could jeopardize the adhesion process causing the finish to scratch easier and/or peel. So this step is extremely important. Take the extra time to clean the surface thoroughly and save yourself from the disappointment and frustration later on

The product you use will depend on where the door is...

Regular interior Retique It Liquid Wood is very durable, but it is not recommended for exterior use. So if your door is exposed to the elements, you'll want to use exterior Retique It Liquid Wood. My door has a storm door protecting it, so I didn't need the exterior.

Using a chip brush, apply a coat of Retique it in the color of your choice. I used bleached as my base.

Allow to dry, then apply a 2nd coat

Now it's time to apply the contrasting color and create the wood grain.

Apply one coat of Retique It in the color of your choice, I used Dark

And then immediately, while the liquid wood is still wet, run the graining tool through, wiping the tool off after each pass


If you're doing an extra large area and can not do it in smaller sections, you may need to mist a bit of water over the liquid wood to keep it from drying before you're able to run the graining tool through.

After applying the liquid wood, I simply just lightly mist the area with water and go over it quickly with the paint brush, and then run the graining tool through

Once that dries, you can apply the stain in your choice of color.

I used black walnut

Dip a rag into the stain and wipe onto the surface in an even layer.

Try not to go over the same area numerous times.

If you want it darker, wait for that coat to completely dry, and then apply another coat.

I applied 3 coats of the black walnut stain to my door

Now, seal your hard work.

Doors typically receive quite a bit of traffic, so you want to use a good topcoat.

Tripletique is my go to for high traffic pieces. I used a satin finish for the my door

These sponge applicators are great for applying topcoats! They are available in our Etsy shop but we do include them with all Retique It and Tripletique purchases.

I pour a bit of sealer onto a paper plate, then dip just a bit of the sponge into the topcoat, and apply it just as I did the stain, dipping the sponge into the sealer as needed

The sheen is just perfect!

The last step is to enjoy your new wood door 😍

I am so happy with how this project came out 😍

You can really see the different colors

You can find all of the products used in this tutorial in our Etsy shop. And as a small token of our appreciation for taking the time to read our tutorial, use code THANKYOU10 for 10% off your purchase 😊 You'll find much more then just Retique It products in our shop!

https://www.etsy.com/shop/DeerRunRevamps

Thank you for reading! We hope you've enjoyed this tutorial and are inspired to redo your front door 💜


If you'd like to see more of our projects, visit our Facebook page

https://facebook.com/deerrunrevamps


And as always, feel free to reach out with any questions 😁

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
3 of 4 questions
  • Leslie McConaughy Leslie McConaughy on May 09, 2022

    Hi! This is absolutely beautiful. My question involves resistance to sunlight. I live in Ohio, so it's not the hottest place on Earth LOL, but my front door faces West and gets all the afternoon sun. So much so that the vinyl molding around the window actually melted a bit and is distorted. I am replacing that with Oak trim, but wonder if the treatment would stand up to the heat. Thanks for your help.

  • Julie Julie on May 11, 2022

    Your door turned out beautifully. Two questions:

    The door in your example looks like it was painted wood or textured metal before you started. Have you had similar success (and pictures maybe??) of a smooth metal door getting this treatment? I dislike my grey metal door very much and want to replace it with wood but if I can achieve similar results, you have just saved me oodles of $$$!

    Also, it looks like your original post was about a year ago… does it still look this good and are you just as satisfied now?

    Thanks!


  • Kelly Kelly 4 days ago

    Would this technique be appropriate for a metal garage door?

Comments
Join the conversation
2 of 11 comments
  • Anne Anne on Apr 28, 2022

    This is beautiful !! I was just looking at my front door...now I know what I want to do with it !!! Thank you !!

  • JR Pablo JR Pablo on May 06, 2022

    I am going to try it. Dark wood doors are expensive. Looks beautiful. Thanks.

Next