How to Make a Cost Effective Accent Wall
If you are looking for a cost effective way to add that wow factor, look no further!
The first thing you will want to do is draw up a rough draft of the design you would like to do.
once I had my design on paper I went to Home Depot and bought a https://www.homedepot.com/p/3-4-in-x-4-ft-x-8-ft-Particle-Board-Panel-ru1191248096000000a/202518919
and has the worker cut it down to 1 inch pieces.
I had him cut me 25 pieces just to be safe, the design I drew up only needed 20.
Once you have all your supplies ready to go, you will want to paint the wall the color you will be using
I am using rosy sandstone by valspar
I do not use tape, I like to use an edger.
this is way more cost effective that buying rolls of tape, plus it saves me so much time.
Now that my wall is painted and ready to apply the wood I am bringing in my nail gun to let it build up pressure while I cut my wood pieces to the length and angles that I will be using.
(I used a chop saw to cut my pieces)
Using a stud finder I am nailing the wood pieces to the wall Just like the plan that I drew up.
I started at the top and worked my way to the bottom.
Now that the boards are attached to the wall you will want to fill in all the nail holes and caulk the sides of the boards.
I apply the caulking to the nail holes with my fingers and then wiped with a baby wipe.
For the edges I just ran the caulking gun along the sides.
I also tried out a caulking tool, but I was just as happy with using a baby wipe to smooth the edges.
Now that your caulking is dried, you can paint the boards to match the wall.
I used a small brush to make it easier to get into the corners.
Now you have a beautiful eye catching accent wall.
what do you think?
follow along on Instagram @briannanbrown for more ideas 🤍
Enjoyed the project?
Resources for this project:
See all materialsComments
Join the conversation
-
Maggie on Sep 21, 2022
Looks great! You would have not gotten it done so well without the help of the doggo. :-)
-
Brianna | briannabrowndesigns on Sep 22, 2022
Exactly
-
-
-
Zeta McMillan on Sep 22, 2022
Beautiful looking👀 Great job
-
Frequently asked questions
Have a question about this project?
Can I use carb board or another material instead of wood ?
Could you paint the wood strips before nailing them up?
then touch up your nail holes? Must use caulking on strip edges or not?
i feel no caulking leaves a cleaner strip.. maybe I’m wrong.. lol
Wouldn't this wall be a real pain to clean, with all the strips of board?