First Time Using Transfers
So if you follow my page you’ll see I paint two side tables (or lockers as we call them in Ireland)
but I feel they were a little boring and plain so I decided to order some transfers for them and was amazed at how fab the looked!!!
let me know what you all think?
They come in a roll and you just measure and cut to the size you want which is great if you have a big piece of furniture
They also have ones for knobs which I thought was so clever!!
This was them fully painted before I put the transfers on
I just placed them over the top to decide wha I wanted!
I cut around the edges of the pattern I wanted and made sure I was happy before taking off the backing paper
Peel a small bit o the backing off and stick down the pattern
It comes with a little tool to rub over the surface to make sure it sticks to the furniture - you can check it’s stuck by lifting the clear plastic off and if it’s not fully stuck just place it back down and give it a rub
When it’s all stuck down remove the clear plastic
Cut the knob transfers to size
Place on the knob
rub it with your tool and then take it off!
Close up!!
I added a few Tiny ones to the front
Top view
Finish it with 2 top coats!
Frequently asked questions
Have a question about this project?