Caroline
Caroline
  • Hometalker
  • Arlington, WA

Closet Decor From Duct Tape and Pop Cans

5 Materials
$10
Easy

I have lived in quite a few rentals in my day. With every new new place challenges arise on how to decorate it. One thing that is seems always typical of rentals is the hollow-core sliding doors for the closet. I absolutely hate, hate, hate these things. If I have the opportunity, my usual response is to remove and hide them, and hang a curtain, tapestry, beaded curtains, something besides those ugly fake wood doors. Unfortunately, in my current home there is no place to store them. So, staring at my closet doors one morning, which my bed faces, I couldn’t take it anymore. I decided needed to dress them up. But I did not want to spend a lot of money doing so. We are thinking about making a move soon(ish) so I did not want to spend a lot of money, also I needed to do something that would not risk my security deposit. I have seen projects where people add trim and paint and make these doors look fantastic, but that is just not an option for me (no painting here, wah!). So looking around and deciding to use what I had, I came up with is pretty cool way of dressing up these doors without risking your security deposit. (This post contains affiliate links. For my full disclosure policy click link at the bottom of this post)
*When of comes time to remove duct tape, it is actually very simple. Pull up the tape, use a butter knife or a plastic window scraper. To get rid of the residue, do not use Goo-Gone! You would be scrubbing forever! Instead, use WD-40. WD-40 is a petroleum based lubricant that helps soften the adhesive residue. Let it sit on the residue for a few minutes and it should wipe right off!!
I began by slicing open each aluminum can. I used a craft knife and a pair of sharp scissors for this part. It was pretty easy, but be careful, cut aluminum can be sharp. I sliced down the length of the pop can with the craft knife and then cut around both the bottom and the top piece with the scissors and it opened up no problem. Next I cut out a star shape about the size that I wanted out of cardboard. I taped that to my aluminum and outlined it with a stylus, leaving an outline on the aluminum. After the star was outlined, I used the scissors to cut each star out. It’s easier if you cut from each point into each corner rather than trying to turn the scissors in the corners. Now I had my star shape, but I wanted them to be more dimensional. So I took my stylus and drew a line from each tip to the center of the star, flipped the star over, and drew a line on the opposite side from each corner to the center. This made valley and mountain folds on each side. Then I grabbed each point and bent each one in the direction of the fold I had began with the stylus. There are many tutorials on how to get dimensional stars out of paper online, this is the same idea, just using aluminum.
First I whipped out my gold duct tape. This stuff is great. It comes in many different patterns and colors, it’s super cheap, and 1 roll took care of the whole closet. I decided to use a simple triangle themed pattern, but you can do whatever you would like. I measured the width of each door and the width of the closet opening as a whole, because there is some overlap with two doors. Then I figured out how many rows of triangles I wanted, and divided the whole with width by that number to get how far apart to make each row. I decided to go with 6 rows in total, three on each door. I got out my level and a pencil and lightly outlined where the triangle rows would go, to ensure a fairly straight line. Next, I took my duct tape and cut squares from it and then took those squares and sliced them in half diagonally, making triangles. This way there was no waste. Then I got busy sticking them on the doors. I didn’t measure the space between each triangle, I was trying to keep the look casual and organic, I just tried to ensure that the triangle rows were relatively even and relatively straight. Every once in awhile I would switch up the direction of the triangles, just for fun. I really like how it came out. The color of the duct tape is kind of a brassy gold, is so from one side it seems subtle but when you tilt your head or move towards the light and the light will hit the reflective duct tape and each triangle shines very brightly. It’s pretty cool. And of course , you could make a more complicated pattern or something with more contrast. I think this would look cool with white duct tape, or maybe a black Swiss cross or sun ray pattern. The sky is the limit.
But it was still missing something. This was a good start, but it still wasn’t there. So I began roaming my house, digging thru my craft stash when my eyes alit upon our recycling bin and I got an idea. I grabbed up 9 aluminum cans (already rinsed out) and got to work.
After I figured I’d had enough (I used one can for each star) I spray painted them a metallic silver. Then I took a small nail and tapped a small hole at the top of one point on each star and ran a thread through each. Next I took some cream colored yarn I had tucked away left over from another project. I made simple tassels with it, using a DVD case to wrap the yarn around. This actually worked out really well, especially because of the indent on the case where you put your fingers to open the case makes a great spot for the scissors to slip under the yarn. To make a tassel you simply wrap a length of yarn around the DVD case (I wrapped each one about 40 times each) and snip off the excess. You take a small length of yarn and slide it under one side of the wrapped yarn and pull it up towards the top and make a knot. Next you snip through all of the wrapped yarn on the opposite side of from where you died the first knot. You take another length of yarn and tight around the top of the tassle about an inch down towards her fringe. That makes the little ball on top. You wrap the excess around the knot and hide the remaining yarn in the rest of the tassle. Then trim and you’re done. For the base of my garland I simply took 3 10 foot lengths of cotton clothesline and braided them together, tying off each end in a knot. I laid it out on the floor and attached my stars and tassels wherever I felt they looked good. Then I hung it up above my closet, added a couple of brass lanterns I found the next day while thrifting, and I was done!

Suggested materials:

  • Silver Spray Paint
  • Gold Duct Tape
  • Cream colored Yarn
See all materials

Top Hometalk Projects

29 Of The Best DIY Mirror Projects Ever Made
14 Cool Ways To Upholster Chairs That You Can DIY
30 Unusual & Helpful Gardening Tips You'll Want To Know
30 Ways To Use Old Jeans For Brilliant Craft Ideas
30 Ways To Use Old Jeans For Brilliant Craft Ideas
15 Genius Curtain Ideas To Instantly Upgrade Your Space
30 Essential Hacks For Cleaning Around Your Home
14 Cool Ways To Upholster Chairs That You Can DIY
30 Unusual & Helpful Gardening Tips You'll Want To Know
17 DIY-Inspiring Kitchen Backsplashes
18 Fun Ways To Add Glitter To Your Home Decor
21 Totally Terrific Things You Can Do With Doilies
20 Easy Concrete Projects You Absolutely CAN Do!
The Easiest Ways to Grow a Bumper Crop of Tomatoes
21 Totally Terrific Things You Can Do With Doilies
Caroline

Want more details about this and other DIY projects? Check out my blog post!

Go

Have a question about this project?

Join the conversation

2 of 18 comments
  • Karel
    on Dec 13, 2016

    i will but thought i would add to the comment about the cheap hollow core sliding doors, you have a perfect work bench in that door. i one time covered bottom third with old towels "re-purpose' REMEMBER. I STAPLED TO THE BACK SIDE THEN I PUT SoME COTTON BATTING ON IT next i found an old pillow case and slit one side the pulled up on the towel and batting wah la i now have a great table top with an ironing area on it which i now place my sewing machine at the top 1/3 of door i placed a large 36 " quilters mat great sewing or craftin space turn any room into a craft room then when done slide under a bed until next time .

  • Jessie Cushenberry
    on Sep 20, 2018

    I love this project will try it very soon in my bedroom sliding doors

Your comment...