5.1K Views
Garage Floor Epoxy Paint
by
John
(IC: blogger)
$60
3 Hours
Easy
We refreshed our beat up garage floor with a new coat of 2-part epoxy paint in grey. Here's how it went..
Enjoyed the project?
Want more details about this and other DIY projects? Check out my blog post!
Published September 8th, 2013 1:53 PM
Comments
Join the conversation
3 of 13 comments
-
Decorative Concrete Solutions on Nov 29, 2014Acid etching the floor is fine but you have to use a good concentration rate. What most folks don't realize is that after the acid etch not only do you have to rinse all that spent acid out of the garage, you also have to neutralize it with either ammonia water or a baking soda water mix. Most of the epoxy products sold at the big box stores are water based epoxy products. Even the 2-component products sold there are water based epoxies. Typically we grind all our garage floor installations and use 100% solids epoxy. This provides for the best possible adhesion. Also, if you already have a coating down on your floor and it's holding up well but want to put a fresh coat on, acid washing will do absolutely nothing to an already painted/coated surface. What you need to do is to sand or buff with a black buffing pad to scratch up the existing coating so the new epoxy will bond to it properly. If your redoing your garage floor because the existing coating is flaking and peeling up, the only way to prep the floor at this point is to diamond grind everything off and get down to the bare concrete. I'll be happy to answer any questions you may have. Thanks, -Jeff http://www.garageflooringatlanta.com
-
-
Connie Phillips on Aug 12, 2015I need a fast/cost effective way to cover my floors(mobile home). I pulled out the pink carpet so some of my place is just plywood and the rest is ugly linoleum. Is epoxy a possible solution for me?
-
Frequently asked questions
Have a question about this project?