How to Build a Simple Goat Feeder
by
Marywoita
(IC: blogger)
4 Materials
$20
30 Minutes
Easy
When we first started with goats, we only had a handful and feeding them was a breeze. But before long, and as our herd grew, we realized that they were making a huge mess and wasting feed & hay. My ever so crafty, handy man of a husband planned a simple solution, he came up with plans on how to build a goat feeder.
Goats are picky and maybe a bit spoiled, they usually won’t eat feed off the ground. And once it lands on the ground, it becomes a target for their potty breaks. Then they definitely won’t eat that…I don’t blame them really! Is that tmi? Sorry, but its true!
Start by taking two pallets and remove boards from the side that already has less (usually about 3 boards). This makes it easier for the goats to eat out of the feeder when you’re done.
Next, hold two of the pallets together in an upside down “V”. This may take two people. While one person is holding it, take one pallet as a side and use the 1 inch screws to hold in place.
Repeat on the other side until you have two “walls” and a “V” in the middle once its turned right side up.
Once you finish securing it all in place, flip it back over. It will look something like this.
And the finished feeder will look something like this.
Enjoyed the project?
Suggested materials:
- 4 pallets, plus one more for scrap pieces, if needed
- 4 pieces of water line board, approximately 4 feet long. 4 foot pieces of 2×4 will also work.
- 1 inch and 2 inch screws
- An awesome drill
Want more details about this and other DIY projects? Check out my blog post!
Published January 30th, 2018 3:30 PM
Frequently asked questions
Have a question about this project?