You could use a drill and a small bit.
I use a phillips head bit on a drill for mine.
Drill bit. Add a piece of painters tape to the spot where you want hole makes it less slippery to get the hole started. I have no idea why you would damage a phillips head drill bit to drill a hole.
A drill bit designed for wood will work just fine.
Hi Mayr Jane: If my drill isn't handy,and the hole is small, I will heat up my Phillips screwdriver, get it pretty hot, and just punch it through the place I want the hole. If you use a drill and find that the bit slips around, you can heat up your screwdriver and make a small divot for the bit to fit into before making the entire hole. Good luck
If you're worried about doing it with an electric drill, you can try a hand drill. I like these for precise holes because you have a little more control over them and they're not as fast as electric drills.
I would use a drill and drill the holes so you dont end up cracking the resin.
I would use a ceramic/glass drill bit.
Hi Mary Jane
Here is a video to show you how to do this on your planters
Hi Mary, I would use a drill bit specifically made fore tiles. Put a piece of masking tape over the spot where you'd like to drill the hole to keep the drill bit from slipping
Use a drill either electric or hand brace & bit! Best wishes
I use a drill
With a drill start small then get bigger or you could melt it heat up a knife and cut with that
Do you have a drill? That would be the easiest.
Hello. I have always used battery operated drill.
use a drill..3-15-20
You could melt a hole with a lighter then put it through the pot
Use a drill..................
A drill would be the easiest