DIY Outdoor Chairs
Materials:
- (5) 2x4’s @ 8 feet (framing lumber)
- 2 inch brand nails
- 2 1/2" kreg screws
- Stainable wood filler
- Stain
- Cushions
Tools:
- Miter saw
- Tape Measure
- Electric Sander
- Table Saw
- Stain
- Nail gun
- Kreg jig
- Drill
Steps:
1. Using a miter saw:
Cut 4 pieces 24.5 inches (for the legs)
Cut 2 pieces 27 inches (for the arms)
Cut 14 pieces 24 inches (for the side pieces and back pieces and support pieces)
2. Use the Table saw to rip down:
Rip down 6 of the 24 in pieces to 1x3's
Rip down the rest of them to 2x3’s
3. SAND ALL THESE PIECES DOWN WITH ELECTRIC SANDER.
4. Use the Kreg Jig to make pocket holes:
Two pocket holes in 7 pieces. All the 24 inch 2x3's (these will basically make the frame of the chair)
5. Assemble the side framing pieces.
6. Add in the 3 1x3 slats on each side.
7. Attach the back pieces and the front bottom piece. Then add the supports at the bottom.
Once you are done you stain it and fill in the holes with wood filler. Then you can use a satin sealer to seal it.
Cushion size
Wayfair cushions
Each side of the chair
Trying to pick out a stain
Attaching the back part and the front part
Finished product
Enjoyed the project?
Suggested materials:
- 2x3’s (Lowes)
- Stain (Lowes)
- Cushions (Wayfair)
- Woodfiller (Lowes)
- Screws (Lowes)
Comments
Join the conversation
-
PAMELA on Sep 15, 2020
I LOVE THESE CHAIRS... CAN BE USED IN THE HOME! MAKE A DESK/ NIGHT STAND AND BED ON WOOD PLATFORM, WITH SIMILAR DESIGN.
-
Steffi Wood on Sep 15, 2020
Yes!!
-
-
-
Crafty Little Hippie on Jan 24, 2023
Love it, I’m adding this to my “to do” list 🥰
-
Frequently asked questions
Have a question about this project?
Can something like this be made with pallets ?
How many inches are the 1/3 pieces apart?
Also are they comfortable?