Easy DIY Poster Frame
I have a fun project for you today though. We were lucky enough to receive a Mapiful for our new home! When it arrived I new just what I wanted to use to hang it.
I headed to Amazon and got my search on just to realize that I could probably make my own! Lol, typical me! Of course, my honey helped me too!
This project was FREE for us to make, but it would still be very inexpensive to make even if you didn't already have everything on hand.
Step one: Cut two pieces of scrap wood to measure 22" x 1". This is your top pieces.
Step two: Cut two pieces of scrap wood to measure 19" x 1". This is your bottom pieces.
Step 3: Sand all four pieces with 120 grit sand paper on all sides until smooth.
Step 4: Stain all four pieces of wood in the color of your choice. I chose Mahogany stain.
Be sure to wear gloves and use an old rag to apply the stain. I apply with one corner and wipe off excess with another corner of the rag. I let these set under a ceiling fan for about 45 minutes before I handled them. I did not seal the stained wood, but you can if you want to.
Now that the pieces of wood are dry and ready to handle, I started my assembly.
NOTE: The 22 inch pieces go at the top and the 19 inch pieces go at the bottom.
Step 5: To hold the poster in place on the pieces of wood, I used a few staples along the edge.
I stapled both top and bottom of the poster to the wood, but in hindsight I would just do one end at a time for easier handling.
{Sorry I don't have a picture of this step, but it was just me here at the time I was doing this project.}
Step 6: Stack the wood pieces together and wrap with twine on each end. I wrapped the twine about 15 to 20 times on the top pieces but only about 5 times on the bottom pieces. I added a doubled, extra long piece for hanging to the top piece.
NOTE: I used a small dollop of hot glue on each end of the wood to hold them together while I wrapped the twine.
This is the bottom pieces. After I wrapped and tied my knots, I left long pieces of the twine showing just because I liked how it looked, of course this is optional according to your taste! Trim them off if you like!
I love how it looks with our Mapiful! I originally hung it over the fireplace, but then I changed my mind and hung Audrey back there! Pop over to my Instagram to check out Audrey! I changed my IG account name too! @TexasBlueBungalow
We decided that this was the perfect map for our new home because our beautiful 1922 Blue Bungalow is located here and we both love it!
I hope you've enjoyed my project today! You can use any poster or print out you may want to hang. You can even adjust the lengths of the pieces of wood too!
I also painted the fireplace recently too, I'll tell you about that later on.
More details and pictures on our blog if you're interested! Thanks for looking! :)
Enjoyed the project?
Resources for this project:
See all materialsComments
Join the conversation
-
Karen Kimbrough on Aug 25, 2021
Just wanted to say, “Hey, Weatherford! We’re almost neighbors!”
-
-
Frequently asked questions
Have a question about this project?
Great idea but I have 2 questions:
Thank you for posting. This is an awesome idea!
I know Weatherford, Texas. Where did you get that map???
I have Family that live in Weatherford Texas ....My 2 older sisters lived there for years out in Western Lakes Estates.....Both of them have passed on ..one last year in Feb...and the other this past Feb,,,, I went to visit them a lot since I live just about an hour away just south of Rio Vista .....I like that you did a good job on that ...where did you get the MAPIFUL from ?......